GE GFDN110 Reversing the door swing, Tools YOU will Need, Door Parts, STEP-BY-STEP Instructions

Page 12

Reversing the door swing.

GEAppliances.com

Safety Instructions

IMPORTANT NOTES:

n Read the instructions all the way through before starting.

n Handle parts carefully to avoid scratching paint.

n Set screws down by their related parts to avoid using them in the wrong places.

n Provide a non-scratching work surface for the doors.

n Normal completion time to reverse the door swing is 30–60 minutes.

IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed.

These instructions are for changing

the hinges from the right side to the left side—if you ever want to switch them back to the right side, follow these same instructions and reverse all references to the left and right.

Operating Instructions

Troubleshooting Tips

Consumer Support

TOOLS YOU WILL NEED

Adjustable Crescent Wrench

Putty Knife or

Phillips Head ScrewdriverThin-Blade

Screwdriver

DOOR PARTS

Hinge	Plastic Cover		Large Tapping	Tapping Screw (#8) – 2 Machine Screw (#8) – 6
Cover
			Screw (#10) – 6
Hinge Assembly

	Nut (#8) – 2	Washer – 2

STEP-BY-STEP INSTRUCTIONS

Before you Start

1.Unplug the dryer from its electrical

outlet.

12

Image 12

Contents Dryers What to do if yOu SMEll GAS Operating InstructionsProper Installation GEAppliances.comWhen Using Your Dryer Your Laundry AreaWhen Using Your Dryer When not Using Your DryerSee the Loading and Using the Dryer section About the dryer control panel Operating InstructionsModel GFDN100 / GFDN110 Power Dry CyclesTimed Dry Sensor Dry levelClEAN lINT FIlTER message To store a My CyClE combination of settingsDry Temp My Cycle on some modelsSignal About cycle optionsExtend Tumble Damp Alert on some modelsAbout dryer features LockEstimated Time Remaining Drum lampReversing the door swing Tools YOU will NeedDoor Parts STEP-BY-STEP InstructionsRemove Door Assembly STEP-BY-STEP InstructionsReinstall Hinge Assembly Remove HingeReinstall Nuts and Hinge Cover Reassemble Door AssemblyReinstall Door Assembly Move Strike BracketLoading and using the dryer Fabric Care LabelsSorting and Loading Hints Care and Cleaning of the Dryer Lint Filter Clean the lintNever Operate the DRyER WITHOuT ITS FIlTER in PlACE Follow these stepsVenting the dryer Venting must conform to local building codesCorrect Venting Incorrect VentingFor Your Safety MINImUm Clearance Other than Alcove or Closet InstallationAlcove or Closet Installation StackingKIT Contents Installation PreparationInstalling the Stack Bracket KIT Install Rubber Pads to Dryer BaseInstall Bracket to Dryer Remove the Dryer leveling legsInstalling the Stack Bracket KIT Install Dryer and Bracket on WasherFinalize the Installation Prepare the Washer and DryerBefore you call for service…GEAppliances.com Before you call for service… Clothes shrink Greasy spots on clothesLint on clothes Static occursGE Dryer Warranty What Is Not CoveredFor The Period We Will Replace Warrantor General Electric Company. louisville, kySchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design StudioSecadoras ¡ADVERTENCIA No intente encender un fósforoINSTALACIÓNAPROPIADA Durante LA InstalaciónSUÁREADESECADO CUANDOUSESUSECADORACUANDOUSESUSECADORAcont LEAYSIGAESTAINFORMACIÓN DESEGURIDADCUIDADOSAMENTEPanel de control de la secadora Soporte al consumidorModelo GFDN100 / GFDN110 Power Encendido Ciclos de secadoTimed Dry Secado cronometrado Nivel del Sensor Dry Secado por sensorMensaje Clean Lint Filter Limpiar el filtro de pelusa Dry Temp Temperatura de secadoStart Iniciar My Cycle Mi ciclo enalgunosmodelosSignal Señal Delay Start Inicio postergadoOpciones de ciclo Extend Tumble Secado Extend prolongadoFunciones de la secadora BloquearEstimated Time Remaining Tiempo restante estimado La bombilla del tambor giratorioCómo cambiar el sentido de apertura de la puerta NECESITARÁLASSIGUIENTESHERRAMIENTASPIEZASDELAPUERTA INSTRUCCIONESPASOAPASOINSTRUCCIONESPASOAPASOcont Retire el conjunto de la puertaRetire la bisagra Reinstale el conjunto de bisagrasReinstale las tuercas y la cubierta de bisagra Reensamble el conjunto de puertaMueva el soporte de impacto Reinstale el conjunto de puertaCómo cargar y usar la secadora LasetiquetasdelcuidadodelatelaIdeasparalaclasificaciónycargadelaropa No sobrecargue. Estodesperdiciaenergíaycausa arrugasCuidadoylimpiezadelasecadora El filtro de pelusa LimpieNunca Opere LA Secadora SIN EL Filtro EN SU Lugar SigaestospasosVentilación de la secadora Ventilación correctaVentilación incorrecta Apilado ANTESDECOMENZARCONTENIDODELJUEGO HERRAMIENTASQUENECESITARÁPREPARACIÓNPARALAINSTALACIÓN Retire las patas niveladoras de la secadora Instale la abrazadera en la secadoraPrepare la lavadora y la secadora Instale la secadora y la abrazadera en la lavadoraFinalice la instalación Antes de llamar para solicitar servicio… Problema Causas posibles Qué hacer More DRYSecado Húmedo Extend TumbleGarantía de la secadora GE Por el período de GE reemplazaráLo que no está cubierto Garante General Electric Company. Louisville, KYSoporte al consumidor GarantíasampliadasPiezasyaccesorios

Related manuals

Manual 56 pages 42.65 Kb