BASIC OPERATIONS
|
|
| SSM | |
|
|
|
| ATT |
| S | T | D | M |
|
|
|
| SOURCE |
1 | 3 |
|
| 2 |
Turning on the power | 3 Adjust the volume. |
1 Turn on the power. | To increase the volume |
| |
The display illuminates and the |
|
control panel and control dial | To decrease the volume |
come out. |
|
| Volume level appears. |
ENGLISH
2 Select the source.
ATT | Each time you press the button, |
SOURCE | the source changes as follows: |
=FM = DAB tuner*1 = CD*2
=CD changer*1 (or External component*3)
=AM = (back to the beginning)
*1 Without connecting the CD changer and/or the DAB tuner, you cannot select it as the source to play.
*2 If a disc is not in the loading slot, you cannot select “CD” as the source to play.
*3 To select the external component, set the “EXT INPUT” setting to “LINE INPUT.” (See page 33.)
To operate the tuner (FM or AM), see pages 9 – 11.
To play back a CD, see pages 19 – 21.
To play back an MP3 disc, see pages 24 – 28.
To operate the CD changer, see pages 38 – 41.
To operate the external component, see page 42.
To operate the DAB tuner, see pages 43 – 46.
4 Adjust the sound as you want (see pages 29 and 30).
To drop the volume in a moment
Press SOURCE ATT for more than 1 second while listening to any source. “ATT” rotates on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button for more than 1 second again.
To turn off the power
Press and hold OFF 0 until “SEE YOU” appears on the display.
•If you turn off the power while listening to a disc, you can start disc playback from where you have stopped next time you turn on the power.
Note:
When you use this unit for the first time, set the built- in clock correctly, see page 8.
Note on display illustrations:
Illustrations will differ from what appears if “CLOCK DISP” is set to “CLOCK OFF.” See page 32.
7