Setting time delay, Starting the programme

AUDIBLE SIGNAL

When the drying cycle has finished, an intermittent audible signal will sound.

SPECIAL CARE

For especially gentle drying of sensitive fabrics with the care label and for temperature-sensitive textiles (e.g. acrylic, viscose). Programme is executed with reduced heat.

SPECIAL CARE is only suitable for use with loads of up to 3 kg!

SENSITIVE

For gentle drying of frequently-worn textiles. Programme starts on full heat setting, which is then reduced towards the end of the programme to ensu- re gentle care of laundry.

SPECIAL CARE and SENSITIVE cannot be selected together.

Setting time delay

With the DELAY TIMER button, you can delay the start of a programme by between 30 minutes (30' and a maximum of 23 hours (23h).

1.Select the programme

2.Press the DELAY TIMER button as many times as necessary until the required start delay appears on the multi display, e.g. 12h if the programme is to be started in 12 hours. The DELAY TIMER display is illuminated.

If 23h is displayed and you press the button again, the time delay will be cancelled. The display will show 0' and then the duration of the selected programme.

3.To activate the delay timer, press the START/PAUSE button. The amount of time remaining until the programme is set to start is continuously

displayed (e.g. 12h, 11h, 10h, 30' etc).

Until the start of the programme the drum is moved at longish intervals to loosen the laundry

Starting the programme

Press the START/PAUSE button. The programme is started.

The programme progress display and the display showing the level of dryness show drying progress.