Electrolux T57830 manual Select a different program

Problem	Possible cause	Remedy
		Select a different program-
	Wrong programme selected.	me the next time you dry
		(see “Overview of program-
		mes” section).
	Lint filter clogged.	Clean lint filter.
	Heat exchanger clogged	Clean heat exchanger.
	with lint.
Drying results	Overloading of laundry.	Observe recommended loa-
		ding volumes.
unsatisfactory.
	Ventilation slots in base	Uncover ventilation slots in
	area covered up.	base area.
	Residue on inside surface of	Clean inside surface of
	drum or drum ribs.	drum and drum ribs.
		Make an adjustment using
		the INTENSITY function (see
		chapter ”Drying, Selecting
		additional functions”).
	Mains plug disconnected.	Plug in at mains socket.
Loading door does not		Set programme. Loading
	Programme selector in OFF	door can be opened at any
open with DOOR button.
	position.	time by exerting pressure on
		the door.
Loading door does not	Fine strainer not in place	Install fine strainer and/or
	and/or large mesh filter not	snap large mesh filter into
close.
	locked in place.	place.
When pressing a button,	Washing protection. After	Turn the programme knob
the corresponding	the start of the programme,
		to OFF Set the programme
button flashes several	the option can no longer be	again.
times.	set.
	Programme selector in OFF	Turn programme selector to
Drum light does not	position.	LIGHT or to any programme.
work.	Defective light bulb.	Replace light bulb (see next
		section).
PROGRAMME TIME display	Programme time is correc-
	ted automatically depen-
changes erratically or stays		Automatic process; this is
	ding on type and volume of
unchanged for a long		not a machine fault.
time.	laundry and level of dampn-
	ess.
Programme inactive,		Empty condensate tank,
EMPTY WATER display	Condensate tank is full.	then start programme with
illuminated.		START/PAUSE button.

22