Electrolux T57830 manual Programming options, Objective Implementation

Programming options

Objective	Implementation
Permanently programme	1. Turn the programme selector to any programme.
	2. Press the AUDIBLE SIGNAL button and hold down for
in the audible signal	approx. 5 seconds.
which reminds you that	A brief signal sounds several times. The AUDIBLE SIGNAL
the programme is com-	display flashes several times.
plete.	The setting is permanently programmed.
	The setting is cancelled as described under 1 and 2.
	1. Turn the programme selector to any programme.
Adjust “level of dryness”	2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the
	same time and hold down for approx. 5 seconds. The cur-
detection:
	rent setting appears on the multi-display:
If the laundry is slightly
	– C0: Setting for drier laundry
drier or slightly damper
	– C1: Standard setting
at the end of the pro-
	– C2: Setting for damper laundry
gramme
	3. Press the START/PAUSE button until the setting required
than with the
	appears on the multi-display.
standard setting.
	4. Turn the programme selector to OFF.
	The setting is permanently programmed.
	1. Turn the programme selector to any programme.
To deactivate the EMPTY	2. Press the DOOR and SPECIAL CARE buttons at the same
WATER display when	time and hold down for approx. 5 seconds. The multidisplay
	briefly displays ”0”
using
	The EMPTY WATER display is permanently deactivated.
an external drain for
	The setting is cancelled as described under 1 and 2; the
the condensed water.
	multi-display however briefly displays ”1” (rather than
	”0”).

24