JVC KS-FX480J manual Tape Operations, Listening to a cassette, To stop play and eject the cassette

Page 10

TAPE OPERATIONS

ENGLISH

200W

KS-FX480

Multi

MusicTAPE

Scan

Listening to a cassette

You can play back type 1 (normal) tapes.

1 Open the control panel.

To stop play and eject the cassette

Press 0.

Tape play stops, the control panel opens and then the cassette automatically ejects from the cassette compartment.The source changes to the previously selected one.

If you change the source, tape play also stops (without ejecting the cassette this time).

You can eject the cassette while the unit is turned off by pressing 0.

2 Insert a cassette into the cassette compartment.

The unit turns on and

tape play starts automatically.

3 Close the control panel by hand.

Tape–in indicator appears.

4 Select the tape direction.

Each time you press `, the tape direction changes alternately forward

(TAPE ) and reverse

(TAPE ).

Note on One-Touch Operation:

When a cassette is already in the cassette compartment, select tape as the source by pressing TAPE CD-CH to start tape play.

To fast-forward and rewind a tape

Press ¢ for more than

1 second to fast-forward the tape.

When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side.

Press 4 for more than 1 second to rewind the tape. When the tape reaches its end, playback of the same side starts.

To stop fast forward and rewind at any position on the tape, press `.

Tape play starts from that position on the tape.

Notes:

When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)

When the tape reaches its end while fast-forwarding, the tape direction will be changed automatically.

10

Image 10
Contents KS-FX480 For customer UseContents Disp display button Source/clock display z Tape-in indicatorEQ equalizer button Return the battery holder Installing the batteryPlace the battery Remove the battery holderRemote controller RM-RK50To turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSearching a station automatically Auto search Radio Basic OperationsListening to the radio Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Tuning in to a preset station Manual presetTo stop play and eject the cassette Tape OperationsListening to a cassette To fast-forward and rewind a tapeProhibiting cassette ejection To cancel the Dolby B NR, repeat steps 1 and 2 above againTo cancel the prohibition and unlock To play back tapes recorded with the Dolby B NRPlaying the current tune repeatedly Finish the settingTo cancel Blank Skip, repeat the same Skipping the blank portions on the tapeAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustIndication For Preset values Selecting preset sound modes C-EQ Custom EqualizerSelect the sound mode you want Press EQWhen C-EQ Link is set to Link OFF Storing your own sound adjustmentsCall up the sound mode you want to adjust To reset to the factory settings, repeatBasic Procedure Setting the clockChanging the general settings PSM Other Main FunctionsPreferred Setting Mode PSM items To select the external component to use To select the dimmer mode DimmerTo select the level meter Level To set Custom Equalizer Link C-EQ LinkAttaching the control panel You can detach the control panel when leaving the carDetaching the control panel To fast-forward or reverse the track CD Changer OperationsPlaying CDs Select the CD automatic changer CDTo play back tracks repeatedly Repeat Play CanceledTo go to a particular disc directly To go to the next discs or the previous discsExternal Component Operations Select the external component LineTo keep the tape clean MaintenanceTo clean the head Ignition key-off release/Ignition key-on playTroubleshooting Symptoms Causes RemediesFM Tuner SpecificationsPower Requirement AM TunerCall Handle Manija GET0068-002A JControl panel Panel de control Lock Plate Placa de bloqueoBe sure to ground this unit to the car’s chassis Be sure to keep the handles after installing itAsegúrese de conservar las manijas después de instalarlo NotaRear ground terminal Terminal de tierra Posterior Bypassing the ignition switchRojo To an accessory terminal in the fuse block Interruptor de encendidoKS-FX480 Power cannot be turned onJVC Amplifier Nture s’il est recouvert de