•When
Each time you change to the same source, the same sound mode is also recalled and shown on the display. The
•When “C-EQ LINK” is set to “LINK OFF”
The selected sound mode effect applies to any source.
Storing your own sound adjustments
You can adjust the sound modes to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
The last selected sound mode is
recalled and applied to the current sound.
4 Adjust the level.
To increase the level.
To decrease the level.
Equalization pattern changes as you adjust the bass or treble.
Ex.: When you adjust “TRE”
5 Repeat steps 3 and 4 to adjust the other items.
6 Repeat the same procedure to store other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on page 14.
ENGLISH
2
3
Sound mode indicator flashes
Ex.: If you have selected “ROCK” previously
Select the sound mode you want.
Select the item you want to adjust.
• See page 13 for details.
15