JVC KS-FX480J manual External Component Operations, Select the external component Line

Page 22

ENGLISH

EXTERNAL COMPONENT OPERATIONS

200W

KS-FX480
Multi	TAPE
Music	TAPE
Scan

Playing an external component

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

Preparations:

•For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to use – EXT IN” on page 18.)

1 Select the external component (LINE IN).

TAPE	TAPE	LINE IN
		(or CD)

•If “LINE IN” does not appear on the display, see page 18 and select the external input (“LINE IN”).

•Displayed only when one of the following sources is selected – FM, AM and tape.

Note on One-Touch Operation:

When you press TAPE CD-CH, the power automatically comes on. You do not have to press to turn on the power.

2 Turn on the connected component and start playing the source.

3 Adjust the volume.

4 Adjust the sound characteristics you want. (See pages 13 – 15.)

22

Image 22

Contents KS-FX480 For customer UseContents Disp display button Source/clock display z Tape-in indicatorEQ equalizer button Return the battery holder Installing the batteryPlace the battery Remove the battery holderRemote controller RM-RK50To turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSearching a station automatically Auto search Radio Basic OperationsListening to the radio Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Tuning in to a preset station Manual presetTo stop play and eject the cassette Tape OperationsListening to a cassette To fast-forward and rewind a tapeProhibiting cassette ejection To cancel the Dolby B NR, repeat steps 1 and 2 above againTo cancel the prohibition and unlock To play back tapes recorded with the Dolby B NRPlaying the current tune repeatedly Finish the settingTo cancel Blank Skip, repeat the same Skipping the blank portions on the tapeAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustIndication For Preset values Selecting preset sound modes C-EQ Custom EqualizerSelect the sound mode you want Press EQWhen C-EQ Link is set to Link OFF Storing your own sound adjustmentsCall up the sound mode you want to adjust To reset to the factory settings, repeatBasic Procedure Setting the clockChanging the general settings PSM Other Main FunctionsPreferred Setting Mode PSM items To select the external component to use To select the dimmer mode DimmerTo select the level meter Level To set Custom Equalizer Link C-EQ LinkAttaching the control panel You can detach the control panel when leaving the carDetaching the control panel To fast-forward or reverse the track CD Changer OperationsPlaying CDs Select the CD automatic changer CDTo play back tracks repeatedly Repeat Play CanceledTo go to a particular disc directly To go to the next discs or the previous discsExternal Component Operations Select the external component LineTo keep the tape clean MaintenanceTo clean the head Ignition key-off release/Ignition key-on playTroubleshooting Symptoms Causes RemediesFM Tuner SpecificationsPower Requirement AM TunerCall Handle Manija GET0068-002A JControl panel Panel de control Lock Plate Placa de bloqueoBe sure to ground this unit to the car’s chassis Be sure to keep the handles after installing itAsegúrese de conservar las manijas después de instalarlo NotaRear ground terminal Terminal de tierra Posterior Bypassing the ignition switchRojo To an accessory terminal in the fuse block Interruptor de encendidoKS-FX480 Power cannot be turned onJVC Amplifier Nture s’il est recouvert de