Buhler 2895 manual Removing

Page 21

bühler

Allied Front-End Loader

5.With the tractor in neutral, continue to

retract the lift cylinders and extend the bucket cylinders to rotate the upright back against the lock pin stops. Shut the tractor off and set park brake.

6.Install both upright attachment pins and secure with hairpin clip. Start the tractor and slowly raise loader until the parking stands are off the ground.

WARNING Shut tractor off and store parking stands within loader cross tube remembering to stand on the outside of the loader arms. Start the tractor and continue to cycle loader and attachment to verify loader operation.

Removing:

WARNING A bucket or other suitable attachment must be attached to the loader for stability. Always remove the loader on firm level surface away from children’s play areas and high traffic areas.

1.Raise loader to provide clearance to

engage both parking stands. Shut off tractor. Standing along the outside of the loader arms remove parking stands from storage position and engage within the loader mainframe.

- 19 -

P4110

Image 21
Contents Page Warranty Labor Warranty ClaimsOPERATOR’S and Parts Manual BühlerIllustration TSL shown Loader SpecificationsREG TSL Introduction Serial Number here General Safety Notes SafetyBühler Allied Front-End Loader Safety Decal Location Electrocution Hazard PRE Operation Operation Bucket Backfilling or Scraping Bühler Handling bales and pallets Level indicator Grapple Installing Installing / Removing LoaderRemoving Bühler Installing / Removing Loader Attachments TSL Loader Shown LubricationGeneral Inspection MaintenanceMounting Kit Bolt Torque ChartHydraulics Bühler Cable Sleeve Jam Nut Lock Washer Screw TSL General Note and Instructions Problem Trouble ShootingPossible Cause RemedyTrouble Shooting Problem Possible Cause Remedy Parts Appendix 2895 2895 S2895 2895 S Main Frame Assembly Description 2895 2895 S 2895 2895 S Hydraulic Plumbing Assembly Bühler TSL 2895 S TSL Main Frame Assembly Item Part No Description TSL 2895 S TSL TSL 2895 S TSL Hydraulic Plumbing Assembly TSL 2895 S TSL Possible Attachment Interference S2895 and 2895 TSL TSL Cylinder AssemblyPrevailing Torque Locknuts Hydraulic Fitting TorquesPage Buhler Manufacturing a partnership