Buhler 2895 manual Installing / Removing Loader Attachments

bühler

Allied Front-End Loader

INSTALLING / REMOVING LOADER ATTACHMENTS

Installing:

Pin in lock position.

1.Position tractor centrally within the bucket hooks. Dump Quick-tachslightly from vertical position. Slowly drive the tractor forward until the Quick-tachcontacts the bucket.

2.Slowly raise the loader to engage the Quick-tachwithin both bucket hooks. When both hooks are resting on the Quick-tachrollback the bucket. Shut tractor off. Lock using both Quick-tachpins and secure with hairpin clips.

CAUTION Verify attachment installation from tractor seat by lowering level attachment to ground and retracting the lift cylinders.

Removing:

1. Rollback attachment and lower near ground position. Shut tractor off.

2.Remove both Quick-tachpins and place in storage position. Place level attachment on

ground. Slowly dump attachment while backing tractor away.

Pin in storage position

- 21 - P4110