Buhler 2895 manual Bühler

Page 16

bühler

Allied Front-End Loader

For back grading, either load the bucket and position the heel on the ground or position the bucket at 40￿ or less below level as shown. Place the valve in the float position and back up slowly.

IMPORTANT: Float position must be used to reduce down pressure, otherwise cylinder rod(s) and/or bucket damage could occur.

A – Frame: Standard and Heavy Duty A – Frames can be fitted with either spears or pallet forks.

- Standard Duty

The standard duty frame is for handling medium sized round bales (up to 1000 lbs.) fitted with a single centered 1240mm long heat treated spear and two short stabilizers. For pallet applications with a maximum load up to 2000 lbs. when fitted with 42.0” fork kit.

-Heavy Duty 60”

The Heavy Duty 60” frame is for handling medium to large sized round bales (up to 2000 lbs.) when fitted with two bottom 1240mm long heat treated spears and two short stabilizers. For pallet applications with a maximum payload of 4400 lbs. when fitted with the 48.0” fork kit.

NOTE: The heavy duty frame can also be fitted using only the one center spear as per the standard duty A-frame.

- 14 -

P4110

Image 16
Contents Page Warranty Claims Warranty LaborBühler OPERATOR’S and Parts ManualLoader Specifications Illustration TSL shownREG TSL Introduction Serial Number here Safety General Safety NotesBühler Allied Front-End Loader Safety Decal Location Electrocution Hazard PRE Operation Operation Bucket Backfilling or Scraping Bühler Handling bales and pallets Level indicator Grapple Installing / Removing Loader InstallingRemoving Bühler Installing / Removing Loader Attachments Lubrication TSL Loader ShownMaintenance General InspectionBolt Torque Chart Mounting KitHydraulics Bühler Cable Sleeve Jam Nut Lock Washer Screw TSL General Note and Instructions Trouble Shooting ProblemPossible Cause RemedyTrouble Shooting Problem Possible Cause Remedy 2895 2895 S Parts Appendix2895 2895 S Main Frame Assembly Description 2895 2895 S 2895 2895 S Hydraulic Plumbing Assembly Bühler TSL 2895 S TSL Main Frame Assembly Item Part No Description TSL 2895 S TSL TSL 2895 S TSL Hydraulic Plumbing Assembly TSL 2895 S TSL Possible Attachment Interference S2895 and 2895 TSL Cylinder Assembly TSLHydraulic Fitting Torques Prevailing Torque LocknutsPage Buhler Manufacturing a partnership