Buhler 2895 manual General Safety Notes

Page 8

bühler

Allied Front-End Loader

SAFETY

Read and understand all the safety messages listed in this manual. For your safety and the safety of others near the machine, learn how to control and operate the loader properly. It is your responsibility to inform subsequent operators and owners of these precautions.

General Safety Notes:

￿￿Improper use of the loader and tractor can cause serious injury or death. ￿￿Operate the loader while seated in the tractor seat only.

￿￿Keep the work area clear of other persons.

￿￿Never leave the tractor unattended while the attachment is raised. Always lower the attachment to ground and shut tractor off before leaving the tractor seat.

￿￿Never work beneath a raised loader unless it is securely supported. The control lever can be moved or a hydraulic leak could cause the loader to drop resulting in serious injury or death. Refer to the Lift Lock Instructions Decal for proper use of the lift locks.

￿￿Prior to use, check to ensure the attachment is properly locked to the quick-tach. Verify from tractor seat by lowering the attachment to the ground and retracting the lift cylinders.

￿￿Never operate loader with frayed or damaged hoses or leaking fittings. A burst could cause the loader to drop suddenly and result in serious injury or death and cause damage to the loader or tractor.

￿￿Keep tractor on solid ground when raising loader. Loose fill rocks and holes can be dangerous for loader operation and movement.

￿￿If for some reason, you feel the tractor tipping, immediately lower the loader. ￿￿A pivoting front axle acts like a three-wheeled tractor until the stops hit the axle. ￿￿Space rear tires as recommended by the tractor manufacturer. Maximize width for

high lift applications and uneven terrain.

￿￿Add rear ballast as required to ensure 25% of gross vehicle weight is transferred to the rear axle. Loader, attachment and payload must be included as weight.

￿￿Do not raise attachment to extreme heights while tractor is on an incline. Be alert for terrain changes and adjust accordingly. Keep attachment at low travel height, no more than one foot, as long as possible.

￿￿Allow for attachment and loader length when turning.

￿￿The tractor must be equipped with an approved Roll Over Protection Structure (ROPS) and safety belts.

￿￿Use proper lighting and safety warnings when transporting equipment on public roads and during darkness. The Slow Moving Vehicle (SMV) emblem must be visible. Check with your local Law Enforcement Agency for specific requirements.

- 6 -

P4110

Image 8
Contents Page Warranty Claims Warranty LaborBühler OPERATOR’S and Parts ManualLoader Specifications Illustration TSL shownREG TSL Introduction Serial Number here Safety General Safety NotesBühler Allied Front-End Loader Safety Decal Location Electrocution Hazard PRE Operation Operation Bucket Backfilling or Scraping Bühler Handling bales and pallets Level indicator Grapple Installing / Removing Loader InstallingRemoving Bühler Installing / Removing Loader Attachments Lubrication TSL Loader ShownMaintenance General InspectionBolt Torque Chart Mounting KitHydraulics Bühler Cable Sleeve Jam Nut Lock Washer Screw TSL General Note and Instructions Trouble Shooting ProblemPossible Cause RemedyTrouble Shooting Problem Possible Cause Remedy 2895 2895 S Parts Appendix2895 2895 S Main Frame Assembly Description 2895 2895 S 2895 2895 S Hydraulic Plumbing Assembly Bühler TSL 2895 S TSL Main Frame Assembly Item Part No Description TSL 2895 S TSL TSL 2895 S TSL Hydraulic Plumbing Assembly TSL 2895 S TSL Possible Attachment Interference S2895 and 2895 TSL Cylinder Assembly TSLHydraulic Fitting Torques Prevailing Torque LocknutsPage Buhler Manufacturing a partnership