bühler
Allied
Possible Attachment Interference (S2895 and 2895 TSL)
Regular loader linkage setup allows for maximum rollback.
TSL loader linkage setup provides reduced rollback.
Large attachments (such as the C2000 Grapple) may contact the S2895 or 2895 TSL pivot plate. This can occur if the loader is fully rolled back. This interference is avoided in factory assembly. The loader linkage can be reversed to increase attachment rollback if large attachments are not used. See following description below to reverse links.
Before reversing the linkage remove attachments and engage the hydraulic loader lock (refer to page 23 for hydraulic loader lock instructions).
Refer to pages 36 and 37 for corresponding item and part numbers.
Remove 1.25 x 7.25 pin item 40 connecting the linkages items 11, and 12.
Remove 1.25 x 6.25 pin connecting the linkage item 12 to the quick attach item 2.
Reverse the (4) linkages, and reinstall pins and quick attach.
- 40 - | P4110 |