Alliance Laundry Systems 70420801 Position and Level the Tumble Dryer, Make-Up Air

Page 6

Position and Level the Tumble Dryer

The tumble dryer may be moved with or without the skid. To remove the skid, unscrew the four shipping bolts, and discard them.

To fit a 200 pound tumble dryer (with shipping skid) through an 8 foot (2.43 meters) high door, you must remove the front access panel. The upper 3 inches (76 mm) of the stove must also be removed on

200 pound gas tumble dryers. Removing the entire gas or steam heater assembly and the shipping skid will reduce the height to 75 inches (1905 mm).

Level the tumble dryer to within 0.125 inch (3 mm) from front-to-rear (level on cylinder rib), and side-to- side (level on top panel). Shim under corners to level and stabilize unit. Tumble dryer must not rock.

Make-Up Air

Required Make-Up Air Opening

(to the outside) for Each Tumble Dryer

Models		Opening

200 Pound		525 in.2 (3710 cm2)
200 Pound		free air
		free air

	Table 1

Page 6 of 12

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Image 6

Contents Subject Model IdentificationPart No September Steam Models Net Weight approximate Pounds kg Cylinder Capacity dry weight Pounds kgGas Models Net Weight approximate Pounds kg Steam Coil Rating at 100 psigBoiler Horsepower Btu/hrPound Tumble Dryer Dimensions and Exhaust Outlet Locations Cabinet Dimensions Models 200L/N/SExhaust Outlet Dimensions and Locations Models 200L/N/S Electric and Gas Connection Locations for Gas Models Models Electrical Connection Gas Connection200L/N Electric and Steam Connection Locations for Steam Models Models Steam Inlet Diameter 200SModels Electrical Connection 200S Position and Level the Tumble Dryer Make-Up AirONE Manifold Assembly Exhaust RequirementsDuct Pound Stations Mm Duct TWO Manifold Assemblies Non-CE Models Altitude Orifice New Gas RequirementsHigh Altitude Orifice Sizing Gas Rate Feet Inches QuantityElectrical Requirements Pounds Condensate/Hour Steam RequirementsSteam Pressure Supply ReturnLoading Door Strike Belt Drive