Alliance Laundry Systems 70420801 installation manual TWO Manifold Assemblies

Page 8

				3
		TWO MANIFOLD ASSEMBLIES
				TMB2018N
1	NOTE: Where the exhaust duct pierces a		2	Outlet Duct Diameter
	combustible wall or ceiling, the opening		3	45° Typical
	MUST be sized per local codes.		3	45° Typical
	MUST be sized per local codes.

			Figure 2

	Duct			200 Pound
	Stations			12 in. (305 mm) Duct
				12 in. (305 mm) Duct

	A			17 in. (432 mm)

	B			24 in. (610 mm)

	C			30 in. (762 mm)

	D			34 in. (864 mm)
	E			38 in. (965 mm)

	F			42 in. (1067 mm)

	G			45 in. (1143 mm)

	H			45 in. (1143 mm)

	I			52 in. (1321 mm)

	J			54 in. (1372 mm)
	K			57 in. (1448 mm)

	L			60 in. (1524 mm)

Table 3

Page 8 of 12

Image 8

Contents Part No September SubjectModel Identification Cylinder Capacity dry weight Pounds kg Gas Models Net Weight approximate Pounds kgSteam Models Net Weight approximate Pounds kg Steam Coil Rating at 100 psigBoiler Horsepower Btu/hrExhaust Outlet Dimensions and Locations Models 200L/N/S Pound Tumble Dryer Dimensions and Exhaust Outlet LocationsCabinet Dimensions Models 200L/N/S 200L/N Electric and Gas Connection Locations for Gas ModelsModels Electrical Connection Gas Connection Models Electrical Connection 200S Electric and Steam Connection Locations for Steam ModelsModels Steam Inlet Diameter 200S Position and Level the Tumble Dryer Make-Up AirDuct Pound Stations Mm Duct ONE Manifold AssemblyExhaust Requirements TWO Manifold Assemblies Gas Requirements High Altitude Orifice SizingNon-CE Models Altitude Orifice New Gas Rate Feet Inches QuantityElectrical Requirements Steam Requirements Steam PressurePounds Condensate/Hour Supply ReturnLoading Door Strike Belt Drive

TWO MANIFOLD ASSEMBLIES