LINE INPUT (LINE): To select the component connected to the LINE IN plugs on the rear.
AUX INPUT (AUX): To select the component connected to the auxiliary input jack on the control panel.
2 Turn on the connected component and start playing the source.
•If connecting a JVC DVD player or VCR, you can perform the following operations:
When connecting a VCR:
: Turns on and off the power.
3: Starts playback.
Á:
1: Rewinds a tape when pressed.
7: Stops playback.
Note:
When you press the above buttons, the display shows
“VCR” and its operation mode (such as 3, 7).
3 Adjust the volume.
To increase the level.
To decrease the level.
4 Adjust the sound you want. (See pages 33 – 35.)
ENGLISH
When connecting a DVD player:
: Turns on and off the power.
3: Starts playback.
Á: •
• Skips to the beginning of the next chapters when pressed briefly.
1: • Reverses the chapter when pressed and held.
•Goes back to the beginning of the current chapter when pressed briefly. Goes back to the beginning of the previous chapters when pressed consecutively.
7: Stops playback.
Note:
When you press the above buttons, the display shows “DVD” and its operation mode (such as 3, 7).
45