JVC KD-SH909R, KD-SH707R manual Troubleshooting

Page 54

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

	Symptoms	Causes	Remedies

• Sound is sometimes		Contents on the disc are not	Change the disc.
	interrupted.	compatible with the unit.

		You are driving on rough	Stop playback while driving on
		roads.	rough roads.

		Disc is scratched.	Change the disc.

• Sound cannot be heard		Connections are incorrect.	Check the cords and
	from the speakers.		connections.

		The volume level is set to the	Adjust it to the optimum level.
		minimum level.

		The “P.AMP SW” setting is	Set it to “ON.”
		set to “OFF.”	(See page 38.)

•CD-R/CD-RW cannot be CD-R/CD-RW is not finalized. Insert a finalized CD-R/CD-RW

Playback	played back.		or finalize the CD-R/CD-RW
	played back.		or finalize the CD-R/CD-RW
	• Tracks on the CD-R/CD-RW		with the component used for
	cannot be skipped.		recording.
General
General	• “NO DISC” or “EJECT	The unit may function	While pressing				, press and


	ERR” appears on the	incorrectly.	hold 0for more than 2 seconds.
	display and disc cannot be		(Be careful not to drop the disc
	ejected.		when ejecting.)

•No message appears on the display but disc cannot be ejected.

		• When “ERR 00” to “ERR			Something is blocking the	Press the reset button on the
				44” appears on the display.	control panel movement.	front panel. (See page 2.)
						If the reset button does not
						work, check the Installation/
						Connection Manual (separate
						volume).
						(Ex.: You have used screws
						which are longer than
						specified.)

		•		This unit or CD changer	The built-in microcomputer	Press the reset button on the
				does not work at all.	may function incorrectly due	control panel. (See page 2.)
					to noise, etc.


		•		SSM (Strong-station	Signals are too weak.	Store stations manually.
		•		SSM (Strong-station	Signals are too weak.	Store stations manually.
FM/AM				Sequential Memory)
FM/AM				automatic preset does not
				automatic preset does not
				work.

		•		Static noise while listening	The antenna is not connected	Connect the antenna firmly.
				to the radio.	firmly.

54

Image 54

Contents KD-SH909R/KD-SH707R KD-SH707RHow to reset your unit PrecautionsContents How to use the M mode button How to change the display patternsPressing M mode again also clears the functions mode Location of the Buttons MP3 indicators only for KD-SH909RSource/clock indicator MO monaural indicator Control panelRemote controller EnglishPlace the battery Installing the batteryRemove the battery holder Return the battery holderTurning on the power To drop the volume in a momentBasic Operations Finish the setting Setting the clockTo turn off the power Set the hourSearching a station automatically Auto search Radio Basic OperationsListening to the radio Select FM or AM MW/LWWhen an FM stereo broadcast is hard to receive Searching a station manually Manual searchSelect the FM band FM1 3 you want to store FM stations into FM station automatic preset SSMManual preset Press and hold both buttons for more than 2 secondsTune in to a station in this example, of 88.3 MHz Select the band FM1 3, AMRDS Operations What you can do with RDSTo use Network-Tracking Reception Press T/P to activate TA Standby Reception Using TA Standby ReceptionSame programme can be received on different frequencies To deactivate the TA Standby Reception, pressUsing PTY Standby Reception To deactivate the PTY Standby ReceptionPress and hold T/P for more than Searching your favourite programmeTo store your favourite programme types Seconds Press and hold T/P againChanging the display mode while listening to an FM station Setting the TA volume level Automatic clock adjustmentPTY codes Open the control panel CD OperationsPlaying a CD Insert a disc into the loading slotTo go to the next or previous tracks To stop play and eject the discTo fast-forward or reverse the track To go to a particular track directlySelect text display mode while playing a CD Text Playing a CD TextSelecting CD playback modes To cancel the prohibition and unlock the disc Prohibiting disc ejectionTo play back only intros Intro scan MP3 Introduction What is MP3?Precautions when recording MP3 files on a CD-R or CD-RW Compatible with ID3v1Movement between the directories pages 30 MP3 directory/file configurationMP3 playback/search order HierarchyPlaying an MP3 disc When TAG Disp is set to on initial setting seeMP3 Operations Insert an MP3 disc into the loading slotWhen TAG Disp is set to OFF Elapsed playing time with track NoTo fast-forward or reverse the file To skip to the next or previous filesTrack Title File name Track No Elapsed playing time To select a particular file in a directory, press On the remote controllerTo go to a particular directory directly On the control panelTo skip to the directories on the lower hierarchy levels To skip to the directories on the upper hierarchy levelsTo play back files repeatedly Repeat Play CanceledSelecting MP3 playback modes REPEAT1 REPEAT2To adjust the input level of each source Sound AdjustmentsAdjusting the sound FaderPress EQ to activate the sound mode EQ Select the sound mode you wantStoring your own sound adjustments Basic Procedure Select a PSM item you want to adjust. SeeOther Main Functions Preferred Setting Mode PSM items 24H/12HTo select the level meter LEVEL/EQ To select the dimmer mode DimmerTo set the clock display Clock To turn the key-touch tone on or offContrast Line To adjust the display contrast levelTo select the scroll mode Scroll CUT OFF FThrough this receiver KEY SEL To change the FM tuner selectivityIf Filter Select the character set you want while Is flashing Numbers and symbolsTo erase the input characters Select a characterTo restore the control panel to its original position When using the remote controllerAdjust the angle to the position you want Changing the control panel angleDetaching the control panel Attaching the control panelUnlock the control panel MD player, etc You can connect a JVC DVD player or VCR to the Line in plugsWhen connecting a VCR When connecting a DVD playerAdjust the sound you want. See pages 33 CD Changer Operations Playing CDsSelect the CD automatic changer CD Changer RANDOM1 RANDOM2 To go to a particular disc directlyTo show CD Text information Flashes All tracks of all discs Inserted in the magazineIntro 1 Intro To play back tracks repeatedly Repeat PlayWhat is DAB system? Select the DAB tunerTo tune in to a particular ensemble without searching Select a service you want to listen toService name Ensemble name Frequency Channel number Select the DAB band DAB1, DAB2, or DAB3Press and hold ¢ or 4 to select a service you want Storing DAB services in memoryPress M mode Within Select the DAB band DAB 1, DAB 2 or DAB 3 you wantService Select the number 1 6 for the preset DAB service you wantTo use Alternative Reception Sound modes preset frequency level settings Additional InformationAvailable characters Troubleshooting Symptoms Causes Remedies CD Changer MP3 Playback only for KD-SH909RHandling discs MaintenanceHow to handle discs Moisture condensationFor KD-SH909R SpecificationsFM Tuner MW TunerHaving Trouble with operation?