JVC KD-SH707R, KD-SH909R manual Setting the TA volume level, Automatic clock adjustment

Page 19

Automatic selection of the station when using the number buttons

Usually when you press the number button, the preset station is tuned in.

However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting. (Programme search)

•The unit takes some time to tune in to another station using Programme search.

To activate programme search, follow the procedure below.

•See also “Changing the general settings (PSM)” on page 36.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “P(Programme)-SEARCH.”

3 Turn the control dial clockwise to select “ON.” Now programme search is activated.

4 Press SEL (select) to finish the setting.

To cancel programme search, repeat the same procedure and select “OFF” in step 3 by turning the control dial counterclockwise.

Setting the TA volume level

You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.

•See also “Changing the general settings (PSM)” on page 36.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4to select “TA VOLUME.” 3 Turn the control dial to set to the desired volume.

You can set it from “00” to “50.”

4 Press SEL (select) to finish the setting.

Automatic clock adjustment

When shipped from the factory, the clock built in this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock adjustment, follow the procedure below.

•See also “Changing the general settings (PSM)” on page 36.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “AUTO ADJ (adjustment).”

3 Turn the control dial counterclockwise to select “OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

To reactivate clock adjustment, repeat the same procedure and select “ON” in step 3 by turning the control dial clockwise.

Note:

You must stay tuned to the same station for more than 2 minutes after setting “AUTO ADJ” to “ON.” Otherwise, the clock time will not be adjusted. (This is because the unit takes up to 2 minutes to capture the CT data in the RDS signal.)

ENGLISH

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents KD-SH707R KD-SH909R/KD-SH707RPrecautions How to reset your unitContents How to change the display patterns How to use the M mode buttonPressing M mode again also clears the functions mode Control panel MP3 indicators only for KD-SH909RSource/clock indicator MO monaural indicator Location of the ButtonsEnglish Remote controllerReturn the battery holder Installing the batteryRemove the battery holder Place the batteryTo drop the volume in a moment Turning on the powerBasic Operations Set the hour Setting the clockTo turn off the power Finish the settingSelect FM or AM MW/LW Radio Basic OperationsListening to the radio Searching a station automatically Auto searchSearching a station manually Manual search When an FM stereo broadcast is hard to receivePress and hold both buttons for more than 2 seconds FM station automatic preset SSMManual preset Select the FM band FM1 3 you want to store FM stations intoSelect the band FM1 3, AM Tune in to a station in this example, of 88.3 MHzWhat you can do with RDS RDS OperationsTo use Network-Tracking Reception To deactivate the TA Standby Reception, press Using TA Standby ReceptionSame programme can be received on different frequencies Press T/P to activate TA Standby ReceptionTo deactivate the PTY Standby Reception Using PTY Standby ReceptionSeconds Press and hold T/P again Searching your favourite programmeTo store your favourite programme types Press and hold T/P for more thanChanging the display mode while listening to an FM station Automatic clock adjustment Setting the TA volume levelPTY codes Insert a disc into the loading slot CD OperationsPlaying a CD Open the control panelTo go to a particular track directly To stop play and eject the discTo fast-forward or reverse the track To go to the next or previous tracksPlaying a CD Text Select text display mode while playing a CD TextSelecting CD playback modes Prohibiting disc ejection To cancel the prohibition and unlock the discTo play back only intros Intro scan Compatible with ID3v1 What is MP3?Precautions when recording MP3 files on a CD-R or CD-RW MP3 IntroductionHierarchy MP3 directory/file configurationMP3 playback/search order Movement between the directories pages 30Insert an MP3 disc into the loading slot When TAG Disp is set to on initial setting seeMP3 Operations Playing an MP3 discElapsed playing time with track No When TAG Disp is set to OFFTo skip to the next or previous files To fast-forward or reverse the fileTrack Title File name Track No Elapsed playing time On the control panel On the remote controllerTo go to a particular directory directly To select a particular file in a directory, pressTo skip to the directories on the upper hierarchy levels To skip to the directories on the lower hierarchy levelsREPEAT1 REPEAT2 CanceledSelecting MP3 playback modes To play back files repeatedly Repeat PlayFader Sound AdjustmentsAdjusting the sound To adjust the input level of each sourceSelect the sound mode you want Press EQ to activate the sound mode EQStoring your own sound adjustments Select a PSM item you want to adjust. See Basic ProcedureOther Main Functions 24H/12H Preferred Setting Mode PSM itemsTo turn the key-touch tone on or off To select the dimmer mode DimmerTo set the clock display Clock To select the level meter LEVEL/EQCUT OFF F To adjust the display contrast levelTo select the scroll mode Scroll Contrast LineTo change the FM tuner selectivity Through this receiver KEY SELIf Filter Select a character Numbers and symbolsTo erase the input characters Select the character set you want while Is flashingChanging the control panel angle When using the remote controllerAdjust the angle to the position you want To restore the control panel to its original positionAttaching the control panel Detaching the control panelUnlock the control panel You can connect a JVC DVD player or VCR to the Line in plugs MD player, etcWhen connecting a DVD player When connecting a VCRAdjust the sound you want. See pages 33 Playing CDs CD Changer OperationsSelect the CD automatic changer CD Changer Flashes All tracks of all discs Inserted in the magazine To go to a particular disc directlyTo show CD Text information RANDOM1 RANDOM2To play back tracks repeatedly Repeat Play Intro 1 IntroSelect the DAB tuner What is DAB system?Select the DAB band DAB1, DAB2, or DAB3 Select a service you want to listen toService name Ensemble name Frequency Channel number To tune in to a particular ensemble without searchingSelect the DAB band DAB 1, DAB 2 or DAB 3 you want Storing DAB services in memoryPress M mode Within Press and hold ¢ or 4 to select a service you wantSelect the number 1 6 for the preset DAB service you want ServiceTo use Alternative Reception Additional Information Sound modes preset frequency level settingsAvailable characters Troubleshooting CD Changer MP3 Playback only for KD-SH909R Symptoms Causes RemediesMoisture condensation MaintenanceHow to handle discs Handling discsMW Tuner SpecificationsFM Tuner For KD-SH909RHaving Trouble with operation?
Top Page Image Contents