Searching a station manually: Manual search
1 Select the band (FM1 – 3, AM).
FM1 FM2 FM3
AM
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2 Press and hold ¢ or 4 until “M (manual)” starts flashing on the display.
Selected band appears.
3 Tune in to a station you want while “M” | ENGLISH |
higher frequencies. | |
is flashing. |
|
To tune in to stations of |
|
To tune in to stations of lower frequencies.
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for
When an FM stereo broadcast is hard to receive:
Press MO RND (monaural/random) while listening to an FM stereo broadcast.
•Each time you press the button, the MO indicator lights up and goes off alternately.
Lights up when receiving an
FM broadcast in stereo.
MO
RND
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.
7