| OTHER MAIN FUNCTIONS | |
Setting the clock |
| 5 Finish the setting. |
|
|
|
You can also set the clock system to either 24 hours or 12 hours.
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
(See page 22.)
2 Set the hour.
1Select “CLOCK H (hour)” if not shown on the display.
2 Adjust the hour.
1 2
3 Set the minute.
1Select “CLOCK M (minute).”
2 Adjust the minute.
12
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5 seconds, then the power turns off.
Changing the general settings (PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode)
control.
Basic Procedure
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
(See page 22.)
ENGLISH
2 Select the PSM item you want to adjust. (See page 22.)
4 Set the clock system.
1Select “24H/12H.”
2 Select “24H” or “12H.”
1 | 2 | 3 Adjust the PSM item selected. |
CONTINUED ON THE NEXT PAGE
21