Haier HWDC1000TXVE ME-U Washing & Drying, Power supply, Water connection, Preparing the laundry

Page 13

using the APPLIANCE

13

Washing & Drying

Power supply

Connect the washer dryer to the power supply (220V to 240V~/50Hz)..

Water connection

Turn on the tap.. The water must be clean and clear..

Note: Before use, check for leakage in the joints between the tap and the inlet hose by turning on the tap.. Do not use the appliance until the hoses are properly fixed..

Preparing the laundry

¬Sort out clothes according to fabric (cotton, synthetics, wool or silk) and to how dirty they are..

¬ Separate white clothes from coloured ones.. Wash them first by hand to check if they fade or run..

¬Empty pockets from objects like lighters and matches, keys, coins, etc.. and remove the harder decorative objects (e..g.. brooches)..

¬ Garments without hems, underwear, finely woven textile such as fine curtains are to be put into wash bag (it is better not to wash them in a washing machine)..

¬ Close zippers and hooks, make sure the buttons are sewn on tightly and place small items such as socks, belts, bras, etc.. in the wash bag..

¬ Unfold large pieces of fabric such as bed sheets, bedspreads, etc.. ¬ Turn shirts inside out..

PLEASE NOTE

This Washer Dryer is for domestic use only.. Do not use it for purposes other than that for which it was designed.. Follow the instructions given on the label of each garment and wash only machine-washable garments.. Do not dry garment that has been cleaned with industrial chemicals..

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Washer Dryer ¬ Consumption Using the appliance MaintenanceHowthreadedto wire a 13 amp plugtap.. UK Onlyoutlet Important Safety InformationBlue wire must be connected to the terminal marked N Mains cord close to the machineComponents AccessoriesThanks for purchasing a Haier product 3x Blanking plugsPreparing The machine PreparationDescription Ensure you connect the appliance directly to a Safety instructionsHold the plug and not the electric cable when Adjusting the bottom cover InstallationAdjusting the washer dryer Dismantle the Transportation boltsInlet Hose Connecting to the power supplyDrain hose 80 100 cm¬ Power switch ¬ Program knob Dry OnlyLast 3 settings with Amber LED’sControl Panel Drawer ¬ Delay buttonCompartment 1 Pre-wash detergent ¬ DisplayProgram Modes Program selectionTechnical Data Consumption and technical dataConsumption Table Turn on the tap.. The water must be clean and clear Power supplyWashing & Drying Water connectionWASHING&DRYING Setting spin speed Setting washing temperatureAfter using the appliance WashingWash Load Care ChartLoad Reference Cleaning the filter Cleaning & careDrain pump when the filter is removed After washingWater inlet and inlet filter CLEANING&CAREMoving the machine Long periods of disuseDisplay Codes and Special Functions Display codesTroubleshooting Trouble shootingImportant Disposal Instructions
Top Page Image Contents