Haier HWDC1200TXVE ME-U Cleaning&Care, Water inlet and inlet filter, Moving the machine

Page 18

18 MAINTENANCE

CLEANING&CARE

Water inlet and inlet filter

To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet and inlet filter regularly..

Moving the machine

If the machine is to be moved to a distant location, replace the transportation locks removed before installation to prevent damage as shown below..

1..Remove the blanking plugs..

2..Remove the back cover

3.Insert the synthetic stabilisers and the transportation bolts..

4.Tighten the bolts with a spanner..

5.Replace the back cover..

Long periods of disuse

If the washer dryer is left idle for a long period, pull out the electrical plug and turn off the water supply.. Open the washer dryer door to prevent formation of moisture and odours.. Let the door open while not used..

Image 18

Contents Washer Dryer Using the appliance Maintenance ¬ ConsumptionBlue wire must be connected to the terminal marked N Important Safety InformationHowthreadedto wire a 13 amp plugtap.. UK Onlyoutlet Mains cord close to the machineThanks for purchasing a Haier product AccessoriesComponents 3x Blanking plugsPreparation Preparing The machineDescription Safety instructions Ensure you connect the appliance directly to aHold the plug and not the electric cable when Adjusting the washer dryer InstallationAdjusting the bottom cover Dismantle the Transportation boltsDrain hose Connecting to the power supplyInlet Hose 80 100 cmDry OnlyLast 3 settings with Amber LED’s ¬ Power switch ¬ Program knobControl Panel Compartment 1 Pre-wash detergent ¬ Delay buttonDrawer ¬ DisplayProgram selection Program ModesConsumption and technical data Technical DataConsumption Table Washing & Drying Power supplyTurn on the tap.. The water must be clean and clear Water connectionWASHING&DRYING After using the appliance Setting washing temperatureSetting spin speed WashingCare Chart Wash LoadLoad Reference Drain pump when the filter is removed Cleaning & careCleaning the filter After washingMoving the machine CLEANING&CAREWater inlet and inlet filter Long periods of disuseDisplay codes Display Codes and Special FunctionsTrouble shooting TroubleshootingImportant Disposal Instructions