Typical Installation
Typical Installation, with Circulation
Key for FIG. 2
A | Reactor Proportioner | G | Feed Pump Air Supply Lines (3/8 in. (76 mm) ID min) |
B | Heated Hose | J | Fluid Supply Lines |
C | Fluid Temperature Sensor (FTS) | K | Feed Pumps |
D | Heated Whip Hose | L | Agitator |
E | Fusion Spray Gun | M | Desiccant Dryer |
F | Proportioner and Gun Air Supply Hose | N | Recirculation/Over Pressure Relief Return Hoses |
|
| P | Gun Fluid Manifold |
|
| K | G |
|
| M | |
|
|
| M |
|
|
| K |
A
NF
J
D
E
L
N
P
C*
B
ti11571a
* Shown exposed for clarity. Wrap with tape during operation.
FIG. 2: Typical Installation, with Circulation
6 | 311882T |