LCR 3D BUTTON FUNCTIONS
The STOP button freezes the display and flashes the digital depth as a reminder. The Total Sensitivity Updateg feature of the LCR 3D allows you to stop the display, and adjust the sensitivity to provide the best representation of the terrain beneath your boat. Pressing STOP again will restart display movement.
The ID button helps to differentiate fish from brush or structure and does this in different ways depending on the view. Whenever ID is active, a fish symbol is shown at the bottom of the screen. In the 3D view, ID turns on "strings" which attach fish to the bottom directly beneath them. As with any perspective view, a fish floating above the bottom would be difficult to tell its position in the view. The ID strings show you where each fish is relative to the bottom, so you know if it is to the left or right of your boat.
In the 2D view, ID performs this function in a slightly different way. Fish, which are normally shown as pixels, are shown as the same
three symbols used in the 3D view. Also, the area of the display beneath the bottom is
In the
BEAM, as already discussed, allows you to select each of the four sonar beams individually, or use all four simultaneously. BEAM has no function in the 3D or
VIEW, as discussed previously, switches the LCR 3D between the 3D, 2D and Quad- Beam® views.
The remaining four buttons are the select system and control
SELECT SYSTEM
The previous section explains the buttons that let you control the display of screen images. This section shows you how to use the LCR 3D "Select System" to choose from a wealth of useful features and functions.
When you press the SELECT button, you see a menu that offers the following functions for further adjustment:
•Sensitivity
•Depth Range
•Bottom Alarm
•Fish Alarm
•Zoom
•Bottom Lock
•Custom Program
•Diagnostic