WHAT’S ON THE 3D SONAR DISPLAY
The 900 Series™ can display a variety of useful 3D information about the area under and adjacent to your boat, including the following items:
Triplog
1
2 | 14 |
|
34
10
5
6
11
8
7
13
9
12
11 3D Bottom Contour - Shows the shape of the bottom derived from depth measurements on 6 beams. 3 bottom styles are available; the front edges of the bottom contour are outlined to create a visual anchor. The width of the bottom covered is approximately equal to the depth.
12Upper Depth Range
13Lower Depth Range
14Frame - provides a reference for bottom and Fish ID+™ information. A Range of frame styles are available, from simple to complex.
Triplog
1Depth - water depth; can be set to alarm when the water becomes too shallow.
2Timer - Elapsed time (with Speed input or GPS Receiver).
3Distance - Distance traveled (with Speed input or GPS Receiver).
4Average Speed - Average speed reading (with Speed input or GPS Receiver).
5Barometric Pressure - Requires
6Temperature - water surface temperature
7Speed - The 900 Series™ can display the speed of the boat, and can keep a triplog of nautical or statute miles traveled (with Speed input or GPS Receiver).
82D Sonar View - traditional 2D sonar for the identification of structure and bottom hardness.
9Boat/Direction Arrow - A simple, solid 3D boat is drawn when the Upper Depth Range is 0. A solid 3D arrow is drawn when the Upper Depth Range is not 0.
10Fish ID+™ - A fish icon will be shown at the derived position of the fish. Six fish icon styles will be used to indicate the primary beam in which the fish was found.
24