Humminbird 531374-1_A manual WAY Cursor Control KEY, View Preset Keys, Exit KEY, Info KEY

Page 33

www531374..reelsche-1 A - 947 Man.qxd 2/15/2005matic7:53..coPM Pagem33

item quickly: Alarms, Sonar, Navigation, Chart, Setup, Views, and Accessories tabs are part of your tabbed Main Menu System. Use the LEFT or RIGHT 4-WAY Cursor Control key to select a tab; then use the DOWN or UP key to select the menu item, and the LEFT or RIGHT key to alter a menu setting.

4-WAY CURSOR CONTROL KEY

The 4-WAY Cursor Control Key has multiple functions, depending on the situation:

Freeze Frame - Pressing any arrow on the 4-WAY Cursor Control key will freeze the display in the 2D Sonar View and a cursor and cursor dialog box will be displayed. The cursor can be positioned on the Sonar View using the 4-WAY Cursor Control key.

Active Cursor - In any Bird's Eye View, the 4-WAY Cursor Control key controls the motion of the eyepoint. In any Chart View, the 4-WAY Cursor Control key pans the charts.

NOTE: In either Freeze Frame or Active Cursor mode, you can also make the cursor move diagonally by pressing in between two of the arrows on the 4-WAY Cursor Control key..

Menu Selection - Use the DOWN or UP arrow keys to select a menu choice from the menu list, then use the LEFT or RIGHT arrow keys to change a menu setting.

NOTE: Menu choices are implemented and saved immediately - no further action is required.

Change 3D Perspective - Use any arrow key to change the perspective in the 3D Sonar View. Subsequent presses of arrow keys rotate and tilt the 3D representation.

VIEW PRESET KEYS

The VIEW PRESET keys are used to program your three favorite views for quick retrieval. Instead of using the VIEW key to cycle through every view to find the one you want, you can program the VIEW PRESET keys to display a specific view immediately. To program each VIEW PRESET key, use the VIEW key to cycle to the view you want to store. Press and hold one of the VIEW PRESET keys for several seconds. A series of audible chirps will be heard indicating that the view has been programmed to the key. You can store up to three views, one on each key.

EXIT KEY

The EXIT key has multiple functions, depending on the situation:

•If an alarm is sounding, pressing EXIT will cancel the alarm.

•If a menu tab is selected, pressing EXIT will exit the menu mode and return to the view.

•If a menu is active, pressing EXIT will return to the previous level in the menu system.

•Pressing EXIT will cycle through the available views in reverse order.

•If Freeze Frame is active, pressing EXIT will return to a scrolling display.

•If the Cursor is active, pressing EXIT will remove the cursor from the display.

INFO KEY

Press the INFO key while in any navigation view to display information about objects that are nearest to an active cursor.

28

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Page Thank You Table of Contents 2D Sonar X-Press Menu Menu System Start-Up Options Menu3D Sonar X-Press Menu Navigation X-Press MenuAlarms Menu Tab Chart Menu TabSetup Menu Tab Views Menu Tab Accessories Menu Tab TroubleshootingHOW the 900 Series Works Series Introduction3D Sonar 2D SonarGPS and Cartography MULTI-MEDIA Card MMC SD SlotSD Slot Installation Overview Accessory BUSAccessory Bus 900 Series has a wide variety of configurationsControl Head Installation Basic installation tasks that you must perform includeGimbal Mounting the Control Head Mounting Screws Washer Gimbal Mounting Bracket Cables Routed Near Mounting Bracket Screws provided Plug Cable Connector Assembly to Back of Control HeadIN-DASH Mounting the Control Head Plug Cable Connector Assembly to Back of Control Head Connecting the Control Head Power Cable to the Boat Transducer InstallationTransom Transducer Installation To determine transducer mounting locationStepped Hull To attach the pivot to the transducer To mount the transducer bracket to the boatBut do not completely tighten Attaching the BracketTo mount the transducer pivot assembly to the bracket To adjust the running position of the transducerNormal Cavitation Reassemble To route the transom transducer cableFully tightened Routing the CableInside the Hull Transducer Installation Trial installationDetermine the transducer mounting location Route the cable Permanently mount the transducerMake sure the position of the transducer is marked Transducer Mounted Inside the HullTrolling Motor Transducer Installation Test and Finish the Transducer InstallationIf you have… Then use GPS Receiver InstallationHand-tighten only Follow these steps to stem mount the GPS receiverAccess Under Mounting Location Access Under Mounting LocationTo the cable as shown Finish Routing the Cable and Check GPS Receiver Operation No Access Under Mounting LocationRouting the cable to the control head Install the temperature probe accessoryTo test the installation Testing the System InstallationSeries 947c 3D Combo Title Screen Powering UP the Control HeadTriplog WHAT’S on the 3D Sonar DisplayBait Ball RTS Real Time Sonar Window WHAT’S on the 2D Sonar DisplayBottom Presentation Real Time Sonar RTS WindowKEY Functions POWER/LIGHT KEYView KEY Menu KEYWAY Cursor Control KEY View Preset KeysExit KEY Info KEYMARK/GOTO KEY ViewsViews available on your 900 Series are Views and Readouts 3D/2D Combo View3D/2D Combo View 2D Sonar View 2D Sonar View2D Zoom View 2D Zoom ViewBIRD’S EYE View Beam Sonar ViewBeam Sonar View Bird’s Eye ViewChart View CHART/BIRD’S EYE Combo ViewChart/Bird’s Eye Combo View with Active Cursor Chart View with Active CursorCHART/3D Combo View CHART/2D Combo ViewChart/2D Combo View Chart Orientation Chart View with Cursor PresentViewing Cartography WAYPOINTS, Routes and Tracks NavigationWaypoints, Routes and Tracks SAVE, EDIT, or Delete a Waypoint Chart View with Target Navigate to a Waypoint or PositionADD a Waypoint Target or Trolling Grid SAVE, Edit or Delete a Route Chart View with GridSave or Clear a Current Track EDIT, Delete or Hide Saved TracksMenu System Sonar Tab, Advanced Mode Sonar Tab, Normal ModeSTART-UP Options Menu Exit Normal operation by powering your 900 Series offNormal Operation Normal Simulator System StatusSimulator Self Test Accessory Test GPS Diagnostic ViewSystem Status Self TestGPS Diagnostic View Accessory TestAccessory Test Screen GPS Diagnostic View2D Sonar X-PRESS Menu To Adjust Split Screen PositionActive Side Split PositionTo adjust the Upper Range To adjust the SensitivitySensitivity Upper RangeChart Speed Lower RangeBottom Lock Bottom Range To adjust the Bottom Range2D/3D Priority To change the 2D/3D Priority3D Sonar X-PRESS Menu Highlight Split Position on the 3D Sonar X-Press Menu3D Sonar X-Press Menu Beam Sensitivity 3D Bottom Zoom3D Lower Range To adjust the 3D History Reset 3D ViewTo Reset 3D View 3D HistoryNavigation X-Press Menu Highlight Split Position on the Navigation X-Press MenuClear Current Track Save Current TrackSave Current Route Skip Next WaypointCancel Navigation Remove TargetRemove Grid 2D Sonar Colors Sonar Menu TAB3D Bottom Style 3D Frame StyleFish ID+ 2D Beam SelectTo change Beam Select To set Fish ID+To change the RTS Window setting To change the Fish ID Sensitivity settingTo change the Fish ID 3D Reference setting Fish ID SensitivityZoom Width Bottom ViewKHZ Sensitivity Depth LinesTo change the Max Depth setting To change the Noise Filter settingSurface Clutter Noise FilterTemperature Graph Water TypeColor BAR Navigation Menu TAB TracksWaypoints To change the North Reference setting To change the Chart Orientation settingRoutes North ReferenceTrackpoint Interval Trolling Grid RotationTrack MIN Distance MAP DatumExport ALL NAV Data Chart Menu TABDelete ALL NAV Data To Export All Navigation DataMAP Borders Chart Detail LevelLAT/LON Grid Spot SoundingsShaded Depth SET MAP OffsetClear MAP Offset Depth Alarm Alarms Menu TABFish ID Alarm To change the Depth Alarm settingLOW Battery Alarm Temp AlarmOFF Course Alarm Arrival Alarm Drift AlarmAlarm Tone To change the Units Depth setting Setup Menu TABTo change the Units Temp setting Units DepthUnits Distance User ModeUnits Speed LanguageTriplog Reset Restore DefaultsSelect Readouts To Select Readouts Default Sonar View Customized Sonar ViewTemp Offset Depth OffsetLocal Time Zone Daylight Saving TimeTime Format Position FormatDate Format Nmea OutputViews Menu TAB SonarTo turn Nmea Output on or off To turn Sonar on or offAccessories Menu TAB TroubleshootingSeries Doesn’t Power Up Series Defaults to Simulator with a Transducer Attached Control head loses power at high speeds Display ProblemsOther electronic devices Finding the Cause of NoiseNoise re-appears Boat’s engineHumminbird Service Policy Year Limited WarrantyReturning Your Unit for Service Series AccessoriesFor IN-WARRANTY service, complete the following steps Operating Frequency SpecificationsAppendix a Contact Humminbird
Top Page Image Contents