Furuno 500 manual Setting the temperature alarm, Setting the trip distance alarm

Page 57

5. ALARMS

5.1.8Setting the temperature alarm

There are five types of water temperature alarms: UNDER, OVER, INSIDE, OUT OF RANGE and CURRENT RIP. The UNDER and OVER alarms sound when the water temperature is lower or higher than the value set, the INSIDE and OUTSIDE alarms sound when the water temperature is within or outside the range set. For CURRENT RIP, the alarm sounds when the temperature changes over the value set within a minute.

1.Rotate the course control knob to select TEMP ALARM from the ALARM menu.

2.Press the course control knob to show the temp alarm options window.

OFF

UNDER

OVER

INSIDE

OUT OF RANGE

CURRENT RIP

Temp alarm options window

3.Rotate the course control knob to select the water temperature condition. When selecting the INSIDE, OUT OF RANGE or CURRENT RIP, set the number for upper and lower limits. For UNDER or OVER, set a value (Setting range: 0 to 120°F or –20 to 50°C).

4.Press the course control knob.

5.1.9Setting the trip distance alarm

The log trip alarm alerts you a defined distance has been reached.

1.Rotate the course control knob to select TRIP LOG ALARM from the ALARM menu.

2.Press the course control knob to show the log trip options window.

OFF

ON

Log trip options window

3.Rotate the course control knob to select “ON” or “OFF” as appropriate. When selecting ON, set appropriate value (Setting range: 0 to 9999 nm/km/sm).

4.Press the course control knob.

5-7

Image 57
Contents Model NAVpilot-500 00014698415 How to discard this product How to discard a used battery Important NoticesGeneral Safety Instructions Table of Contents Index Features ForewordWord to the Owner of the NAVpilot-500 System configuration of NAVpilot-500 System ConfigurationPrinciple of Autopilot Principle of the AutopilotPrinciple of Operation Basic Operation Operating ControlsControl unit, front view Turning the power off Turning On/OffStartup sequence Choosing the display mode Adjusting Brilliance and ContrastDisplays Contrast, brilliance windowSelecting data Displayed data Analog indicator selectionPort Stbd Available graphics for graphic displayStby Mode Stby mode display ex. Normal DisplaySteering Modes Auto Mode Using the Auto modeAuto mode display Normal display Advanced Auto mode display ex. Normal display Advanced Auto modeEnabling the Advanced Auto mode Advanced auto options windowNAV Mode Starting the NAV modeNAV mode display Normal display Selecting sailing method of NAV mode Nav mode options windowNAV mode, Course and XTE Waypoint switching options window Switching waypointSteering Mode Turn menu Turn ModeExample of 180º maneuver in turn mode 180º Turn for Auto mode only360º Turn for Auto mode only Example of 360º maneuver in turn modeExample of orbit maneuver ex. clockwise OrbitTo escape from the Orbit while it is in use, press Stby key Spiral Example of spiral maneuver in turn modeSteering Mode Figure Eight Example of Figure Eight in NAV modeTLL navigation Navigating to TLL pointDial type remote controller FAP-5551 Remote ModeRotating dial Turning power off dial typeNFU No Follow-Up mode display Turning power on, button and lever type remote controllersTurning power off, button and lever type remote controllers Operating remote controller ex. button and lever typesDodge Mode Dodging in Stby modeDodge mode display 359 Dodging in Auto or NAV modeThis page is intentionally left blank Stby Mode Menu Stby mode menuMenu Operation Parameter setup menu Setting parametersSelecting the method of entering the parameter Sea state options windowDeviation level options window MANUAL-CALMExample of Manual parameter Setting parameters manuallyRudder angle and rudder gain setting Track line and weather setting valueWeather Rudder GainGeneral guidelines for setting rudder gain General guidelines for setting counter rudder gainCounter Rudder Auto trim options window Adjusting the sensitivity in monitoring the boat’s trimNAV Mode When towing a netNav mode data source window Auto net towing options windowWaypoint Switching Fish ModeRadius of Orbit Spiral SpeedSystem setup menu Setting other menu itemsActivating key beep Key beep options windowLock options window Locking the control unitSetting the panel dimmer Alarms Alarm MenuAlarm menu Audio alarm options window Selecting the alarm buzzerAlarm interval options window Selecting the beep patternSetting the watch alarm Setting the heading deviation alarmWatch alarm options window XTE alarm options window Setting the cross-track error limitSpeed alarm options window Setting the speed alarmDepth alarm options window Setting the depth alarmSetting the trip distance alarm Setting the temperature alarmTemp alarm options window Log trip options windowLog trip clear options window Clearing the trip distanceAlarm Information Alarm messages, their meanings and priorities Alarm messagesPreventive Maintenance Maintenance & TroubleshootingMaintenance program Check point RemedyDiagnostics Replacement of FuseParts Name Type Code No Remarks Test options windowProcessor Unit Test Controller Unit TestHeading Sensor Test Screen Test Keyboard TestRudder test Rudder Setup and Auto TestClearing Memories System DataSystem data screen Error Messages Error messagesError message Meaning Remedy Error messages con’t MN-1 Menu TreeMN-2 Auto mode menuControl Unit Processor UnitInterface Power Supply Environmental ConditionsCoating Color IN-1 Index
Related manuals
Manual 2 pages 40.46 Kb

500 specifications

Furuno 500 is a high-performance marine radar system that represents the forefront of maritime navigation technology. Designed for both commercial and recreational vessels, the Furuno 500 combines advanced radar capabilities with user-friendly features, providing mariners with accurate situational awareness on the water.

At the core of the Furuno 500’s performance is its high-definition radar display. Utilizing a powerful processor, it delivers crisp imagery and enhanced target detection, even in challenging conditions. The 12-inch or 15-inch LED display ensures visibility in bright sunlight while accommodating multiple viewing modes. The radar can switch between various settings, such as long-range scanning and short-range detail, providing flexibility based on navigation needs.

One of the standout features of the Furuno 500 is the advanced Target Tracking technology. This system allows mariners to monitor multiple targets simultaneously, enhancing safety during navigation. With features like Automatic Radar Plotting Aid (ARPA), the radar can predict the movement of vessels and assist in collision avoidance, offering peace of mind while navigating busy waterways.

Furuno has also integrated digital signal processing (DSP) into the 500 series, which enhances the radar’s ability to filter out noise and clutter. This means users can rely on a clear, precise image without distractions that could impact decision-making. Enhanced target resolution helps in identifying various objects and provides essential data for safe navigation.

The Furuno 500 is also compatible with various networking options, allowing easy integration with other onboard systems such as GPS, AIS, and multifunction displays. This connectivity is crucial for modern vessels, enabling a holistic approach to navigation by consolidating information into a single interface.

In addition to its robust technical features, the Furuno 500 is designed for durability and ease of use. The intuitive menu layout and simplified controls allow mariners of all skill levels to operate the system effectively. Its rugged construction ensures reliable performance in harsh marine environments, making it suitable for both commercial applications and leisure crafts.

In summary, the Furuno 500 radar system offers cutting-edge technology combined with practical features that enhance navigational safety and efficiency. Whether navigating busy ports or remote waters, this sophisticated system caters to the needs of modern mariners, making it an essential tool for any serious vessel.