■TRANSMITTING
1Select your desired zone and channel.
2Press the key programmed as Status to enter Status mode or Selcall + Status to enter Selcall mode.
•When using the Status key to enter Status mode, the target Fleet/ ID is fixed and cannot be selected. Skip to step 5 to continue.
3In Selcall mode, press the GRP 
and 
keys or rotate the CH control to select the ID of the station you want to call.
• Alternatively, you can enter a station ID using a DTMF keypad.
4Press the PF 2 key (the second key from the left, after the CH control), to enter Status mode.
5Press the GRP 
and 
keys or rotate the CH control to select the status ID you want to transmit.
• Alternatively, you can enter a station ID using a DTMF keypad.
6Press the microphone PTT switch or the PF 4 key to initiate the Status call.
• “<COMPLETE>” is displayed when the call has been successfully transmitted.
■RECEIVING
The 
Press any key to return to normal operation.
■REVIEWING MESSAGES IN THE STACK MEMORY
1Press and hold the key programmed as Selcall, Status, or Selcall + Status for 1 second to enter Stack mode.
• The last received message is displayed with the message number.
2Press the GRP 
and 
keys or rotate the CH control to select the desired message.
3Press the PF 1 key to return to normal operation.
•To delete the selected message, press the PF 3 or DTMF # key. To confirm the deletion, press the PF 2 or DTMF 
key.
•To delete all messages, press and hold the PF 3 or DTMF # key for 1 second. To confirm the deletion, press the PF 2 or DTMF 
key.
19