•Playback
Press this key to enter Playback mode. While in Playback mode, select the desired memory channel to play back. Refer to “PLAYBACK” on page 36 for details. Press and hold this key for 1 second to start recording a voice memo. Refer to “VOICE MEMOS” on page 35 for details.
•Public Address
Press this key to toggle the Public Address function ON and OFF. “PUBLIC ADRS” appears on the display when Public Address is activated. To use the Public Address system, your dealer must first install an external speaker.
This function causes all audio input via the microphone to be amplified and output from the external speaker. Adjust the volume level as necessary when using the Public Address system
•Scan
Press this key to scan your transceiver channels for a signal. While scanning,
the
•Scan Delete
Press this key during scan operation to temporarily delete a channel from the scanning sequence. The channel settings are returned to normal when scan is ended. Refer to “TEMPORARY CHANNEL LOCKOUT” on page 14 for details.
•Scan Program
Press this key to access the scan list. You can set each transceiver channel to be added to or removed from your scan list. Refer to “SCAN PROGRAMMING” on page 16 for details.
•Scrambler/ Encryption
Press this key to activate or deactivate the Scrambler/ Encryption function. When activated, the transceiver encrypts your voice so that anybody listening to your conversation will not be able to understand what you are saying. Press and hold this key for 1 second to enter Scrambler Code/ Encryption Key Selection mode. Refer to “SCRAMBLER (FM)/ ENCRYPTION (APCO)” on page 23 for details.
•Scrambler/ Encryption Code
Press this key to enter Scrambler Code/ Encryption Key Selection mode. After entering Scrambler Code/ Encryption Key Selection mode, press the GRP and keys or rotate the CH control to change your Scrambler code/ Encryption key from 1 to 16. Refer to “SCRAMBLER (FM)/ ENCRYPTION (APCO)” on page 23 for details.
•Selcall
Press this key to enter Selcall mode. Press and hold this key to enter Stack mode. Refer to “FleetSync: ALPHANUMERIC
•Selcall + Status
Press this key to enter Selcall mode. Press this key again to enter Status mode. Press and hold this key to enter Stack mode. Refer to “FleetSync: ALPHANUMERIC
31