SCAN PROGRAMMING
Using the key programmed as Scan Program, you are able to reprogram your scan list.
1Press the key programmed as Scan Program.
• The 
(KCH-14 ) or SCAN (KCH-15) icon appears on the display and blinks.
2Press the GRP 
and 
keys or rotate the CH control to select the zone and channel you will add to or remove from the Scan list.
•Press the PF 4 key (the forth key from the left, after the CH control) to toggle between Zone Select and Channel Select.
3Press the PF 2 key (the second key from the left, after the CH control) to add or remove the selected zone or channel to/ from the scan list.
•The channel add indicator 
/ 
) will appear on the display when the selected channel is added to the scan sequence.
If the Priority channel has been set as Operator Selectable by your dealer, you are able to reprogram the Priority mode as well.
1Press the key programmed as Scan Program.
• The 
2Press the GRP 
and 
keys or rotate the CH control to select the zone and channel you will add to or remove from the Scan list.
•Press the PF 4 key (the forth key from the left, after the CH control) to toggle between Zone Select and Channel Select.
3Press the PF 3 key (the third key from the left, after the CH control).
4Press the PF 4 key (the forth key from the left, after the CH control) to toggle the selected channel between Priority mode and Normal mode.
•“P1”, “P2”, or “PP” appears on the
5Press the PF 3 key again to set the new channel setting.
16