ADVANCED OPERATIONS
Your transceiver operations vary according to the functions that your dealer has programmed onto the transceiver keys. Following is brief overview of the programmable functions. Refer to those functions which have been programmed onto your transceiver.
•2-tone
Press this key to display the list of 
and 
keys or rotate the CH control to select your desired code, then press the PTT switch to make the call.
•Autodial
Press this key to quickly call a DTMF number that has been 
and 
keys or rotate the CH control to select your desired code, then press the PTT switch to make the call. Refer to “AUTODIAL” on page 21 for details.
•AUX A
Press this key to activate the Auxiliary A port on the transceiver. When activated, the 
•AUX B
Press this key to activate the Auxiliary B port on the transceiver. When activated, the 
•AUX C
Press this key to activate the Auxiliary C port on the transceiver. When
activated, the 
•Call Response
Press this key to respond to an Individual call.
•Channel Down
Press this key to decrease the channel number. Press and hold this key to cycle down through the channel numbers. If programmed by your dealer, when the lowest channel number is reached, the transceiver will
•Channel Recall
Press this key during Scan to return to the last called zone and channel.
•Channel Select
Using the CH control, turn clockwise to increase the channel number and counterclockwise to decrease the channel number.
•Channel Up
Press this key to increase the channel number. Press and hold this key to cycle up through the channel numbers. If programmed by your dealer, when the highest channel number is reached, the transceiver will
28