Kenwood TK-5710H instruction manual Press the microphone PTT switch and begin your conversation

Page 23

SELCALL (SELECTIVE CALLING)

A Selcall is a voice call to a particular station or to a group of stations.

■TRANSMITTING

1Select your desired zone and channel.

2Press the key programmed as Selcall or Selcall + Status to enter Selcall mode.

3Press the GRP and keys or rotate the CH control to select the ID of the station you want to call.

• Alternatively, you can enter a station ID using a DTMF keypad.

4Press the microphone PTT switch and begin your conversation.

•Alternatively, you can press the PF 4 key to page the selected station, rather than making a voice call.

■RECEIVING

An alert tone will sound, the transceiver will automatically enter Selcall mode, and the calling station’s ID will appear when a Selcall is received.

To respond to the call, press the microphone PTT switch and speak into the microphone.

■IDENTIFICATION CODES

An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number. Each transceiver must have its own Fleet and ID number.

•Enter a Fleet number (100 ~ 349) to make a group call.

•Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.

•Enter a Fleet number make a call to all units in the selected fleet (Fleet call).

•Enter an ID number to make a call to the selected ID in all fleets (Supervisor call).

•Select “ALL” Fleet and “ALL” ID to make a call to all units (Broadcast call).

Note: The ID range may be limited by programming.

STATUS MESSAGE

You can send and receive 2-digit Status messages which may be decided in your talk group. Messages can contain up to 16 alphanumeric characters. Status messages range from 10 to 99 (80 ~ 99 are reserved for special messages).

A maximum of 15 received messages can be stored in the Stack memory of your transceiver. These saved messages can be reviewed after reception. Depending on your dealer settings, when the Stack memory is full, either the oldest message will be erased when a new message is received or the new message will not be stored in the Stack memory.

•The (KCH-14) or (KCH-15) icon appears when a message is stored in the Stack memory.

18

Page 22 Page 24
Image 23
Page 22 Page 24
Contents TK-5710 Explosive Atmospheres GASES, DUST, FUMES, etc Models listed below are covered by this manualOne or more of the following statements may be applicable Contents Dtmf Dual Tone Multie Frequency Calls Making a Dtmf Call Part Number Quantity Unpacking and Checking EquipmentCoil and secure the surplus cable with a retaining band Following tools are required for installing the transceiverPreparation Cable GRP key Power SwitchGetting Acquainted Description KCH-15FULL-FEATURED Control Panel KCH-15 Display Indicator DescriptionTK-5710 Rear Panel Tone Autodial Programmable FunctionsProgrammable Function ReferenceProgrammable Function Basic Operations Press the switch to switch the transceiver onPress the PF 2 or Dtmf key to confirm the password KENW-CHANNEL1 KCH-15 14-digit displayReceiving To stop scanning, press the Scan key again ScanPriority Scan KCH-14 or Scan KCH-15 icon appears on the display and blinks PF1 or Key Function Selcall orSelcall + Status PF4 keyPress the microphone PTT switch and begin your conversation Last received message is displayed with the message number Long messages can contain a maximum of 4096 characters Dtmf Dual Tone Multi Frequency Calls Emergency Calls Scrambler FM/ Encryption Apco Deleting the Encryption KEY Signaling Refer to Selcall Selective Calling on Clock Advanced Operations Emergency ClockDirect Channel 1 ~ Display CharacterMonitor IntercomKey Delete LCD BrightnessScan Delete PlaybackPublic Address ScanTactical Group Speaker 1 2 MuteSquelch Level StatusPTT ID Background OperationsIf the channel is already in use, a warning tone will sound Speak into the microphone to record your voice memo VGS-1 Optional Voice Guide & Storage UnitAR represents conversation records VM represents voice memos
Related manuals
Manual 2 pages 10.93 Kb

TK-5710, TK-5710H specifications

The Kenwood TK-5710H and TK-5710 are versatile and robust two-way radio transceivers, designed with the needs of modern communication in mind. These models stand out in the crowded market of professional radios, providing reliable performance across various applications, including public safety, construction, transportation, and event management.

One of the most notable features of the TK-5710H and TK-5710 is their exceptional versatility. Operating in the VHF (TK-5710) and UHF (TK-5710H) bands, these radios support a wide range of frequencies, allowing users to communicate effectively in various environments. The TK-5710H, operating in the UHF band, is particularly advantageous in urban settings where higher frequency signals can penetrate obstacles more easily, making it ideal for crowded and complex landscapes.

Both models offer 128 memory channels, which allow users to store and select frequencies effortlessly, improving flexibility during operations. Additionally, they are equipped with a powerful 5 watts of output power, ensuring a clear and strong communication signal even over long distances. The built-in advanced digital signal processing (DSP) technology enhances audio clarity, providing users with sharp, intelligible sound quality, even in noisy conditions.

Safety features are a cornerstone of the TK-5710H and TK-5710. Each radio incorporates an emergency alert button, which enables users to send a distress signal to a designated group or base station, ensuring quick assistance when needed. Furthermore, the radios boast enhanced encryption capabilities, which secure communications, preventing unauthorized access and ensuring operational confidentiality.

The ergonomic design of the TK-5710H and TK-5710 enhances user experience. Their compact and lightweight build makes them easy to carry and operate, while the intuitive interface facilitates quick access to functions even in high-pressure situations. The clear LED display and backlit buttons further improve usability, enabling users to operate the radios in low-light conditions.

In terms of durability, both models are constructed to withstand harsh environments. They meet military standards for shock, vibration, and water resistance, making them reliable companions even in extreme conditions.

In summary, the Kenwood TK-5710H and TK-5710 are powerful, versatile, and reliable two-way radios designed for professionals who require top-notch communication solutions. With advanced features, comfortable handling, and robust construction, these radios are well-suited for a variety of demanding applications. The combination of cutting-edge technology and user-oriented design ensures they will meet and exceed the expectations of today’s communication needs.
Top Page Image Contents