Kenwood TK-5710H instruction manual VGS-1 Optional Voice Guide & Storage Unit

Page 40

VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT

When using the optional VGS-1 voice guide & storage unit, you gain access to the voice recorder and voice announcement functions. Ask your dealer for details.

VOICE RECORDER

The voice recorder provides you with an auto recorder to record your conversations and a voice memo function to create voice memos.

The voice recorder can store a combined maximum of 300 seconds (5 minutes) of recordings in blocks of up to 30 seconds each.

AUTO RECORDING

If activated, the auto recording will continuously record all transmitted and received signals. The recording storage area retains 30 seconds of recording, so all transmitted and received signals are simultaneously recorded and erased, leaving only the last 30 seconds of recording in memory.

The auto recording indicator (KCH-14: / KCH-15: ) appears when this function is activated.

VOICE MEMOS

To record a voice memo, for later playback:

1Press and hold the key programmed as Playback for 1 second.

The duration of recording memory will appear on the display and begin counting down.

2Speak into the microphone to record your voice memo.

Pressing the microphone PTT switch at this time will transmit your message as well as record it. Do not press the microphone PTT switch if you do not want to transmit your message.

3Press the PF 2, PF 4, or DTMF key to end the recording at any time and store it into the transceiver memory.

Press the PF 1 key to cancel the recording at any time. The recording is not stored to memory in this case.

If the memory becomes full, recording will stop automatically and store the voice memo to memory.

“WRITING” appears on the display while the recording is being stored to memory.

35

Image 40
Contents TK-5710 Models listed below are covered by this manual Explosive Atmospheres GASES, DUST, FUMES, etcOne or more of the following statements may be applicable Contents Dtmf Dual Tone Multie Frequency Calls Making a Dtmf Call Unpacking and Checking Equipment Part Number QuantityPreparation Following tools are required for installing the transceiverCoil and secure the surplus cable with a retaining band Cable Getting Acquainted Power SwitchGRP key Description KCH-15FULL-FEATURED Control Panel Indicator Description KCH-15 DisplayTK-5710 Rear Panel Programmable Functions Programmable FunctionReference Tone AutodialProgrammable Function Press the PF 2 or Dtmf key to confirm the password Press the switch to switch the transceiver onBasic Operations KCH-15 14-digit display KENW-CHANNEL1Receiving Scan To stop scanning, press the Scan key againPriority Scan KCH-14 or Scan KCH-15 icon appears on the display and blinks Key Function Selcall or Selcall + StatusPF4 key PF1 orPress the microphone PTT switch and begin your conversation Last received message is displayed with the message number Long messages can contain a maximum of 4096 characters Dtmf Dual Tone Multi Frequency Calls Emergency Calls Scrambler FM/ Encryption Apco Deleting the Encryption KEY Signaling Refer to Selcall Selective Calling on Clock Advanced Operations Clock Direct Channel 1 ~Display Character EmergencyIntercom Key DeleteLCD Brightness MonitorPlayback Public AddressScan Scan Delete Speaker 1 2 Mute Squelch Level Status Tactical GroupBackground Operations PTT IDIf the channel is already in use, a warning tone will sound VGS-1 Optional Voice Guide & Storage Unit Speak into the microphone to record your voice memoAR represents conversation records VM represents voice memos
Related manuals
Manual 2 pages 10.93 Kb