Kenwood TK-2202, TK-3202 instruction manual

Page 23

4Press the Side 1 key to increase the VOX Gain level and the Side 2 key to decrease the level.

The VOX Gain can be adjusted from levels 1 to 10

and OFF.

The transceiver announces the VOX Gain level as you adjust it. If OFF is selected, a beep sounds.

5Press the PTT switch to save the setting.

A beep will sound.

The transceiver announces

the new VOX Gain level.

6Turn the transceiver power OFF

and the ON again to activate VOX.

1

Note:

If a speaker/ microphone is connected to the transceiver while the VOX function is switched ON and the VOX Gain level is configured to a higher, more sensitive level, louder received signals may cause the transceiver to start transmission.

When you operate the VOX function, you must use an optional KHS-1 or KHS-21 accessory.

17

Image 23
Contents TK-2202 Page Thank YOU One or more of the following statements may be applicable Precautions Contents Part Number Unpacking and Checking EquipmentAntenna K, M Antenna K2, M2 Preparation Page INSTALLING/ Removing the Battery Pack Installing the Antenna Installing the Cover Over the SPEAKER/ Microphone Jacks Getting Acquainted Antenna LED indicatorProgrammable Auxiliary Functions Basic Operations Advanced Operations MONITOR/ Squelch OFF Priority Scan Revert Channel Temporary DeleteScrambler Voice Operated Transmission VOX Page Background Operations LOW Battery Warning Stun Transmitting Receiving