INSTALLING THE COVER OVER THE SPEAKER/ MICROPHONE JACKS
If you are not using a speaker/ microphone, install the cover over the speaker/ microphone jacks using the supplied 3 x 6 mm screw.
Note: To keep the transceiver water resistant, you must cover the speaker/ microphone jacks with the supplied cover.
Speaker/ microphone
jack cover
INSTALLING THE OPTIONAL SPEAKER/ MICROPHONE (OR HEADSET)
1 Insert the speaker/ microphone (or headset) plugs into the speaker/ microphone jacks.
2 Attach the locking bracket using the supplied 3 x 6 mm screw.
Note: The transceiver is not fully water resistant while using the speaker/ microphone.
Speaker/ microphone
locking bracket
7