Kenwood TK-3202, TK-2202 instruction manual

Page 10

1Plug the AC adaptor cable into the adaptor jack located on the rear of the charger.

2Plug the AC adaptor into an AC outlet.

3Slide the Ni-MH battery pack or transceiver with a NiMH battery pack into the charger.

Make sure the battery pack terminals are in contact with the charger terminals by aligning the grooves of the battery pack with the tabs of the charger.

The charger LED lights red and charging begins.

4When charging is completed, the indicator lights green. Remove the battery pack or the transceiver from the charger.

It takes approximately 3 hours to charge the battery pack.

When the charger will not be used for a long time, unplug the AC adapter from the AC outlet.

4

Image 10
Contents TK-2202 Page Thank YOU One or more of the following statements may be applicable Precautions Contents Unpacking and Checking Equipment Part NumberAntenna K, M Antenna K2, M2 Preparation Page INSTALLING/ Removing the Battery Pack Installing the Antenna Installing the Cover Over the SPEAKER/ Microphone Jacks Antenna LED indicator Getting AcquaintedProgrammable Auxiliary Functions Basic Operations Advanced Operations MONITOR/ Squelch OFF Priority Scan Temporary Delete Revert ChannelScrambler Voice Operated Transmission VOX Page Background Operations LOW Battery Warning Stun Receiving Transmitting