Kenwood TK-3202, TK-2202 instruction manual Getting Acquainted, Antenna LED indicator

Page 14

GETTING ACQUAINTED

Antenna

LED indicator

Lights red while transmitting. Lights green while receiving a signal. Flashes red when the battery voltage is low while transmitting.

Speaker

Microphone

PTT (Push-To-

Talk) switch

Press, then speak into the microphone to call a station. Release to receive.

Side 1 key

Press to activate its programmable function (page 9).

Side 2 key

Press to activate its programmable function (page 9).

Channel selector

Rotate to select channels 1 ~ 8.

Power switch/

Volume control

Turn clockwise to switch ON the transceiver. To switch OFF the transceiver, turn counterclockwise until a click sounds. Rotate to adjust the volume level.

Speaker/ microphone jacks

Battery pack

(KNB-29N)

8

Image 14
Contents TK-2202 Page Thank YOU One or more of the following statements may be applicable Precautions Contents Unpacking and Checking Equipment Part NumberAntenna K, M Antenna K2, M2 Preparation Page INSTALLING/ Removing the Battery Pack Installing the Antenna Installing the Cover Over the SPEAKER/ Microphone Jacks Antenna LED indicator Getting AcquaintedProgrammable Auxiliary Functions Basic Operations Advanced Operations MONITOR/ Squelch OFF Priority Scan Temporary Delete Revert ChannelScrambler Voice Operated Transmission VOX Page Background Operations LOW Battery Warning Stun Receiving Transmitting