Kenwood TK-2202, TK-3202 instruction manual INSTALLING/ Removing the Battery Pack

Page 11

INSTALLING/ REMOVING THE BATTERY PACK

Do not short the battery terminals or dispose of the battery by fire.

Never attempt to remove the casing from the battery pack.

1 Align the battery pack with the back of the transceiver, then press the battery pack and transceiver firmly together until the release latch on the base of the transceiver locks.

2 To remove the battery pack, lift the safety catch on the base of the transceiver, then press the release latch underneath the safety catch.

3While pressing the release

latch, pull the battery pack away from the transceiver.

5

Image 11
Contents TK-2202 Page Thank YOU One or more of the following statements may be applicable Precautions Contents Part Number Unpacking and Checking EquipmentAntenna K, M Antenna K2, M2 Preparation Page INSTALLING/ Removing the Battery Pack Installing the Antenna Installing the Cover Over the SPEAKER/ Microphone Jacks Getting Acquainted Antenna LED indicatorProgrammable Auxiliary Functions Basic Operations Advanced Operations MONITOR/ Squelch OFF Priority Scan Revert Channel Temporary DeleteScrambler Voice Operated Transmission VOX Page Background Operations LOW Battery Warning Stun Transmitting Receiving