Icom IC-40S instruction manual Scan resume Condition, Push LOW for 2 sec. to exit Set mode

4 SCAN OPERATION
■ Scan resume	[
condition

The scan resume condition can be selected as a pause or timer scan.

qPush [LOW] for 2 sec. to enter set mode.

wPush [LOW] several times until “SC” appears.

ePush [Y] or [Z] to select the scan resume timer.

-“t-05” : Scan pauses 5 sec. while receiving a signal.

-“t-10” : Scan pauses 10 sec. while receiving a signal.

-“t-15” : Scan pauses 15 sec. while receiving a signal.

-“P-05” : Scan pauses until the signal disappears and then resumes 5 sec. thereafter.

Pauses until the signal disappears.

15 sec. timer for resume condition.

10 sec. timer for resume condition.

rPush [LOW] for 2 sec. to exit

set mode.

5 sec. timer for resume condition.

10