Icom IC-40S instruction manual Options, Battery packs, Other options

Page 23

DBattery packs

 

 

 

Charging period

 

Battery

 

 

 

 

Operating

Voltage

Capacity

Wall

BC-119 or

pack

 

 

BC-121

period*1

 

 

 

charger

 

 

 

 

with AD-81

 

 

Battery case for AA

 

 

 

BP-194

(R6) ⋅ 8 alkaline or

10 hrs*2

N/A

6 hrs*2

 

Ni-Cd cells

 

 

 

BP-195

9.6 V

700 mAh

10 hrs

1.5 hrs

6 hrs

 

 

 

 

 

 

BP-196

9.6 V

1050

15 hrs

2.0 hrs

9.5 hrs

mAh

 

 

 

 

 

 

 

 

 

 

 

*1 Operating periods are calibrated for the following conditions: at 25°C (77°F), Tx (high power) : Rx : standby = 5 : 5 : 90

*2 When Ni-Cd batteries are installed.

DOther options

BC-110VWALL CHARGER

Used for regular charging of the connected battery pack. BC-119DESKTOP CHARGER + AD-81CHARGER ADAPTOR For rapid charging of battery packs. An AC adapter is supplied with the charger. Some BC-119 versions require the AD-75 additionally. Charging time: 1.5 to 2 hrs.

BC-121MULTI-CHARGER + AD-81CHARGER ADAPTOR

For rapid charging up to 6 battery packs simultaneously. An AC adapter may be supplied depending on version. Six AD-81’s are nec- essary. Charging time: 1.5 to 2 hrs.

OPTIONS 10

HM-46SPEAKER-MICROPHONE

Slim dimensions. Equipped with an earphone jack and a transmit in- dicator.

HM-54SPEAKER-MICROPHONE

For operation while conveniently hanging the transceiver from your belt, etc.

HM-75ASPEAKER-MICROPHONE

Allows you to remotely select operating channels, etc. HS-51HEADSET

For hands-free operation. Includes VOX, PTT and “one-touch” PTT with a time-out timer.

MB-68BELT CLIP

Allows you to attach the transceiver to your belt. Same as supplied. LC-145CARRYING CASE / LC-40SLEATHER CASE

Helps protect the transceiver from scratches, etc. Usable with any battery pack. The LC-40S includes a belt clip for attaching the trans- ceiver to your belt.

OPC-254LDC POWER CABLE

CP-12LCIGARETTE LIGHTER CABLE WITH NOISE FILTER

Allows you to charge a battery pack connected to the transceiver via a DC power source (12–16 V DC) For charging ONLY— the trans- ceiver cannot be simultaneously operated.

SP-13EARPHONE

Provides clear audio in noisy environments.

EX-2118FIELD PROGRAMMING SOFTWARE + OPC-478CLONING CABLE

Provides quick and easy programming of items, including private channels, scan settings, etc., via an IBM® compatible PC.

IBM® is a registered trademark of International Business Machines.

19

Page 22 Page 24
Image 23
Page 22 Page 24
Contents I40S N33 Accessories included with the transceiver Qty Supplied AccessoriesTable of Contents Belt clip Accessory AttachmentBattery pack replacement AntennaPanel description Panel Description1EXTERNAL DC Power Jack Charge Function display Receiving and transmitting Select the desired channel with the Y/Z switchesPush LOW to select the output power if necessary Basic OperationMonitor function DSetting the backlighting timerDisplay backlighting Lock functionPush and hold PTT to transmit Repeater operationOpen Scan Scan OperationScan types Open scanSelect the priority channel if desired Setting scan tagGroup and priority scans Scan resume Condition Push LOW for 2 sec. to exit Set modeTone squelch operation Pocket beep operation Calling a waiting station using pocket beepSquelch opens and the signal can be heard Tone Squelch OperationTery pack becomes exhausted Battery PacksCharging Battery pack Precautions Rapid charging with the BC-119Regular charging Multiple charging with the BC-121Operating period About the battery packInstalling batteries in the battery case Battery pack lifeConfirmation beeps Time-out timer Power saverOther Functions HM-75A functions Turning the microphone remote control function ON/OFFTransmit lockout Optional HM-75A functionsProblem Possible Cause Solution TroubleshootingCurrent drain approx SpecificationsDGeneral DTransmitter DReceiverOther options Battery packsOptions Kamihigashi, Hirano-ku, Osaka 547 Japan
Top Page Image Contents