Telex ur-700 operating instructions Rear Panel

Page 8

Figure 2

Rear Panel

Antenna Jacks: Two antenna jacks for posi phase diversity recep- tion. Attach an antenna to each jack.

Mic Level: XLR type jack connects to balanced mic input of audio sound system (Amplifier/Mixer). Pin 1 ground, Pin 2 +, Pin 3 -.

Line Level: 1/4" jack with screwdriver adjustable unbalanced audio output. Use supplied screwdriver to adjust to desired level.

Power Jack: For external AC wall supply adapter (supplied). Will accept 12-15 volts AC/DC at 300 mA. Plug size is 2.1mm x 5.5 mm.

Power Cord Retainer: To prevent accidental pull out of the power plug.

-7-

Image 8

Contents Telex Antennas Posi Phase DiversityGeneral Information Power DisplaysAudio Outputs AudioUR-700 Receiver Specifications Model HT-700 Transmitter Specifications Model WT-700 Transmitter Specifications Front Panel Rear Panel Receiver Set-up Antenna MountingHT-700 Set-UpMicrophone Jack wired as follows WT-700System Set-Up Your System More Susceptible to OutsideAntenna Placement Bracket Mounting Antenna Placement with Accessory Brackets and Cables Antenna ConnectionInstalling Rack Mounts Assembly of Rack MountDouble Mounting Accessories and Replacement Parts Order No AC Power Supplies Wave Replacement AntennaModel CLA-5 1/2 Wave Antenna Order No Model AB-2 Combination Antenna BracketOrder No Front Connector Mounting KitModel ALP-450 450-900 MHz Directional Log Periodic Antenna FCC Information Customer Service Information April