SECTION 7 – INSTALLING THE HRU IN AN OPEN FACED BRACKET
The ACR open faced bracket is a discontinued product that looks like this:
Contents of the HydroFix™ HRU Kit that you will need:
HydroFix™ Replacement Hydrostatic Release unit (E) Open faced release rod (C)
2 Mounting bracket adapters (J) Mounting rod adapter, metal (L) Small cotter pin (G)
4 Mounting bracket screws (F) HRU Expiration Label (K) Slotted spring pin (I)
Tools required:
Instructions:
1.) Unscrew the four side screws removing the front cover from the bottom mounting plate, keeping the screws.
2.) Unscrew the spring loaded HRU Rod from the bracket and remove the expired HRU. Discard all HRU rods and components.
3.) Align mounting bracket adapters (J) with the screw holes on the bottom mounting plate (see Figure A).
4.) Using the 4 screws removed from the front cover; loosely attach mounting bracket adapters (J) to the bottom mounting plate. Some adjustments may be needed to align the bracket screw holes with the screw holes on the bottom mounting plate.
5.) Mark the expiry date on the HRU according to the instructions in Section 3.
| 13 |