ACR Electronics HRU-100, 9490, Y1-06-0209G manual

Page 6

If any of the above is missing, please contact ACR Electronics’ Technical Service by email at service@acrelectronics,com or by phone at +1 (954) 981- 3333.

Equipment that may be required but is not included:

//Black indelible marker

//Phillips-head screwdriver

//Flat-head screwdriver

//Pliers

Notes, Cautions and Warnings

The following notes, cautions and warnings apply to all EPIRBs and must be followed for personal safety and proper HRU replacement.

WARNING: Failure to replace the entire assembly can cause the bracket to malfunction.

WARNING: Do not use any parts from the old HRU (the one being replaced).

WARNING: The HRU holds down the ejector spring. Take great care to hold the spring in place during removal and installation of the new HRU to prevent injury.

WARNING: Stow the EPIRB in a dry location as it will activate if out of the bracket and wet.

WARNING: Non-ACR-supplied hydrostatic release units must not be installed in ACR Category I EPIRB brackets. ACR cannot and does not warrant the performance of other manufacturers’ products. Installation of a non-ACR-supplied HRU voids the warranty and potentially jeopardizes your safety.

CAUTION: Visually check the EPIRB when removing it from the bracket. It must be sent back to ACR for check up and/or refurbishment if ANY of the following conditions exist:

•Cracks to the exterior plastics

•Activation indicator break tab is broken

•Moisture appears inside the EPIRB

•Lacquer is not present in one of the screws or appears to have been tampered with

NOTE: Some parts in this kit will not be used. Refer to Figure 1 and the instructions for your specific model for details. Discard unused parts.

Y1-06-0209G

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Y1-06-0209G HOW to Determine HRU Expiration Date Introduction Preparing to Install Unpacking the HydroFix HRUPage HOW to Determine HRU Expiration Date Date of Installation ExampleBracket Figure aFigure B Installing the HRU in a SeaShelter2 Page Installing the HRU in a SeaShelter Figure C Installing the HRU in AN Open Faced Bracket Figure a Installing the HRU in a Capsule Bracket Page Appendix a WARRANTY, Useful Life POLICY, Notices Limited Warranty

9490, Y1-06-0209G, HRU-100 specifications

ACR Electronics HRU-100 is an innovative device designed primarily for the safety and rescue operations in marine environments. This highly efficient equipment is part of ACR's suite of emergency beacons that provide reliable communication and alerting services during distress situations. With a focus on durability and performance, the HRU-100 is an essential tool for boaters, mariners, and offshore workers.

One of the standout features of the HRU-100 is its robust design, which is built to withstand extreme conditions typically found at sea. The unit is waterproof, corrosion-resistant, and engineered to float, ensuring that it remains operational even in the harshest environments. The device meets IP68 standards, making it submersible in water for significant periods without compromising functionality.

A key technology incorporated into the HRU-100 is the Global Positioning System (GPS) capability, which allows for precise geolocation data transmission. This feature significantly increases the chances of timely rescue by providing rescuers with accurate positioning information. The HRU-100 also utilizes 406 MHz distress signaling, which is globally recognized by search and rescue agencies. This frequency is crucial as it has a high detection probability and enables quick response times.

In addition to these features, the HRU-100 is compact and lightweight, making it easy to carry aboard vessels or store in emergency kits. The device’s user-friendly interface allows for quick activation in emergencies, with a simple, intuitive design that ensures mariners can deploy it under duress without complicated procedures.

Complementing the HRU-100, the Y1-06-0209G beacon serves as an additional layer of security. This device is designed for enhanced visibility, featuring bright strobe lights and audible alarms to alert nearby vessels and rescue teams. The combination of the HRU-100 and the Y1-06-0209G creates a comprehensive safety system that maximizes the chances of successful rescue.

Overall, the ACR Electronics HRU-100 and Y1-06-0209G beacon represent cutting-edge technology in marine safety. Their advanced features, reliable performance, and rugged design make them essential tools for anyone venturing into open waters. With these devices, users can navigate with confidence, knowing they have reliable support in emergencies.
Top Page Image Contents