ACR Electronics Y1-06-0209G, HRU-100, 9490 manual

Page 17
Figure B

7.) Record the expiration date on the HRU expiration label (K) with an indelible marker.

8.) Push the release spring back against the bracket aligning the holes on the spring with the holes in the back cover of the bracket.

9.) Take the assembled HRU and place the washer end of the HRU through the larger top hole and slide down into the smaller slot.

10.) This will lock the HRU and spring into place. Carefully release the HRU and make sure it is securely in place.

11.) Carefully place your beacon into the bracket.

12.) Place the top cover on top of the bottom cover and maneuver the HRU rod to come out the rod hole on the bracket.

13.) Make sure the bottom hinge and the top bracket are securely connected.

14.) Place a cotter pin into the top of the

HRU release rod locking the bracket together.

15.) Place the cotter pin into the hole closest to the front cover ensuring a secure and snug fit.

NOTE: The release rod contains multiple holes on the end to secure the front cover to the back cover.

16.) Place HRU expiration label (K) on the outside of your bracket in a visible location.

Y1-06-0209G

16

Image 17
Contents Page Y1-06-0209G HOW to Determine HRU Expiration Date Introduction Unpacking the HydroFix HRU Preparing to InstallPage Date of Installation Example HOW to Determine HRU Expiration DateFigure a BracketFigure B Installing the HRU in a SeaShelter2 Page Installing the HRU in a SeaShelter Figure C Installing the HRU in AN Open Faced Bracket Figure a Installing the HRU in a Capsule Bracket Page Limited Warranty Appendix a WARRANTY, Useful Life POLICY, Notices

9490, Y1-06-0209G, HRU-100 specifications

ACR Electronics HRU-100 is an innovative device designed primarily for the safety and rescue operations in marine environments. This highly efficient equipment is part of ACR's suite of emergency beacons that provide reliable communication and alerting services during distress situations. With a focus on durability and performance, the HRU-100 is an essential tool for boaters, mariners, and offshore workers.

One of the standout features of the HRU-100 is its robust design, which is built to withstand extreme conditions typically found at sea. The unit is waterproof, corrosion-resistant, and engineered to float, ensuring that it remains operational even in the harshest environments. The device meets IP68 standards, making it submersible in water for significant periods without compromising functionality.

A key technology incorporated into the HRU-100 is the Global Positioning System (GPS) capability, which allows for precise geolocation data transmission. This feature significantly increases the chances of timely rescue by providing rescuers with accurate positioning information. The HRU-100 also utilizes 406 MHz distress signaling, which is globally recognized by search and rescue agencies. This frequency is crucial as it has a high detection probability and enables quick response times.

In addition to these features, the HRU-100 is compact and lightweight, making it easy to carry aboard vessels or store in emergency kits. The device’s user-friendly interface allows for quick activation in emergencies, with a simple, intuitive design that ensures mariners can deploy it under duress without complicated procedures.

Complementing the HRU-100, the Y1-06-0209G beacon serves as an additional layer of security. This device is designed for enhanced visibility, featuring bright strobe lights and audible alarms to alert nearby vessels and rescue teams. The combination of the HRU-100 and the Y1-06-0209G creates a comprehensive safety system that maximizes the chances of successful rescue.

Overall, the ACR Electronics HRU-100 and Y1-06-0209G beacon represent cutting-edge technology in marine safety. Their advanced features, reliable performance, and rugged design make them essential tools for anyone venturing into open waters. With these devices, users can navigate with confidence, knowing they have reliable support in emergencies.