Standard Horizon Matrix GX3000E owner manual 13 PA/FOG Operation, Operating the PA Hail mode

Page 31

8.13 PA/FOG OPERATION

PA/FOG mode allows the transceiver to be used as a 30W hailer when an optional STANDARD HORIZON 220SW or 240SW PA horn speaker is installed. When in Hail mode the PA speaker Listen’s Back (acts as a microphone and amplifies sound to the front panel speaker) through the PA horn speaker which provides two-way communications through the PA horn speaker.

NOTE

When in PA or FOG mode the GX3000E will receive on the last selected VHF channel before entering into the PA or FOG mode and receive DSC calls.

PA HAIL mode:

PA HAIL mode allows the transceiver to be used as a power hailer when an optional STANDARD HORIZON 220SW or 240 SW HAIL/PA speaker is in- stalled. The Hail mode has a listen-back feature which provides two way com- munication through the HAIL/PA speaker.

FOG HORN mode:

Automatic signaling is transmitted through the HAIL/PA speaker.

8.13.1 Operating the PA HAIL mode

1. Press the [PA/FOG] key, then select “PA” with the CHANNEL selector knob.

2. Press the [ENT] key. 3. Press the PTT switch to speak through the

HAIL/PA speaker. Rotate the CHANNEL selector knob to control the

AF output level. The AF output level can be set from 0 to 30 watts.

4. To exit the PA HAIL mode, press the [PA/FOG] or [CLR] key.

8.13.2 Operating the FOG HORN mode

Operator can select from “Underway,” “Stop,” “Sail,” “Tow,” “Aground,” “Anchor,” “Horn,” or “Siren.” Please refer to page 95 for FOG Horn Timing Chart.

1.	Press the [PA/FOG] key, then select “Fog” with the
	CHANNEL selector knob.
2.	Press the	[	ENT	]	key.
2.	Press the		ENT		key.
3.	Turn the CHANNEL selector knob to select the one
	of the eight functions described above.
4.		[			(	MENU	)]	key.
4.	Press the CALL/SET					MENU		key.
5.	On the “Horn” and “Siren” modes, press the PTT

GX3000E									Page 31
GX3000E									Page 31

Image 31

Contents Watt VHF/FM ITU Class D DSC Marine Transceiver Matrix GX3000ETable of Contents Appendix Packing List General InformationOptions Installation Note About VHF Radio Getting StartedSelecting AN Antenna Coaxial Cable Desktop Mounting Overhead Mounting InstallationLocation Mounting the RadioOptional MMB-84 Flush Mount Bracket MMB-84 Flush Mount InstallationReverse polarity connections will damage the radio Electrical ConnectionsWire Color/Description Connection Examples Accessory CableChanging the GPS Time Checking GPS ConnectionsLocal Changing the Time LocationChanging COG to True or Magnetic Receiver Audio Tone Control GX3000E Remote Mic or External Speaker Selection RAM+ mic procedureBasic Operation Power Switch / Volume Control VOL/PWR Controls and IndicatorsPA/FOG Key WX KeyDistress Key Accessory Connection Cable 16/9 Key PTT Push-To-Talk SwitchMemo Transmission Transmit Time OUT Timer TOTBasic Operation ReceptionNoaa Weather Alert INTERNATIONAL, USA, and Canada ModeSIMPLEX/DUPLEX Channel USE Noaa Weather ChannelsEmergency Channel 16 USE Noaa Weather Alert TestingMaking Telephone Calls Calling Another Vessel Channel 16 orDual Watch to Priority Channel Operating on Channels 13Selecting the Scan Type ScanningMemory Scanning M-SCAN Priority Scanning P-SCAN Operating the FOG Horn mode Operating the PA Hail mode13 PA/FOG Operation Intercom Operation Navigation IndicationCalling CommunicationVoice Scrambler General Maritime Mobile Service Identity MmsiWhat is an MMSI? Digital Selective CallingProgramming the Mmsi Transmitting a DSC Distress Alert DSC Distress AlertTransmitting a DSC Distress Alert with Nature of Distress Distress Relay Receiving a DSC Distress AlertTransmitting an All Ships Call ALL Ships CallReceiving an All Ships Call Individual Call Setting up the Individual / Position Call DirectorySetting up Individual Reply Setting up the Individual/Group Call Ringer Pre-Programmable Calling Transmitting an Individual CallManual Calling Receiving an Individual Call Call Waiting DirectoryTo Delete the Received Log from the DSC Log Directory Group Call Setting up a Group CallTransmitting a Group Call Manual Calling Receiving a Group Call Position Request Setting up Position ReplyPre-Programmable Request Transmitting a Position Request to Another VesselManual Request Automatically reply Receiving a Position RequestPosition Send Setting up a Position Send RingerTransmitting a DSC Position Send Call Receiving a DSC Position Send Call DSC Transmission Test Manual Inputting GPS Location LAT/LON Lamp Adjusting Radio SetupLCD Contrast Time Offset True Magnetic Change NAV display Time LocationScan Type Priority Channel SETKEY Beep ON/OFF Scan Resume TimeWX Alert Channel Name Change Flybridge Naming the Radio or Second Station MIC or HandsetFOG Alert Tone Frequency Enhanced RAM+ MIC Operation Squelch Control SQL Activates the squelch adjusting mode11.1 RAM+ MIC Controls PTT Push-To-TalkSWITCH Activates transmission KEY Power Switch PWRDistress KEY Operating the PA / Hailer 11.2 PA/FOG OperationOperating the FOG Horn Press and hold the Dwic key while in Radio mode Manual Inputting of the GPS Location LAT/LON 11.5 DSC/RADIO Setup Mode Changing GPS Information to Vessel Position or COG PWR key PTT Push-To-Talk Switch Activates transmission12 VH-310 Handset Operation 12.1 VH-310 Handset ControlsSecondary use Keypad 1DIM key Secondary use 12.2 PA/FOG Operation Intercom Operation Manual Inputting of the GPS Location LAT/LON Radio SETUP-menu DSC SETUP-menu 12.5 DSC/RADIO Setup ModeExternal Speaker AF Selection Type Pattern Usage FOG Horn Timing ChartReplacement Parts MaintenanceFactory Service Symptom Probable Cause Remedy Troubleshooting ChartChannel Assignments VHF Marine Channel Chart Channel USE VHF Marine Channel Chart 157.075 Government Only Environmental protection operations General SpecificationsDeclaration of Conformity Vertex Standard