Standard Horizon Matrix GX3000E owner manual 11.2 PA/FOG Operation, Operating the PA / Hailer

Page 73

11.2 PA/FOG OPERATION

The RAM+ is capable of controlling the 30W Public address, 4 fog horns, bells and whistles.

11.2.1 Operating the PA / Hailer

1. Press and hold the [NAV] key then select “PUBLIC ADRESS” with the [S] or [T] key.

2. Press the [CALL(ENT)] key.

3. Press the PTT switch and speak into the microphone.

4. To turn up the PA Volume, press the PTT switch and press the [S] or [T] keys to adjust the Audio output level. The level can be set from 0 to 30W.

5. To adjust the listen back volume, (while in listenback mode) press the [VOL] Key, then press the [S] or [T] key to the desired listen back volume.

To exit from the PA / Hailer mode, press and hold down the [NAV] key again.

11.2.2 Operating the FOG Horn

The GX3000E is capable of sending Underway, Stop, Sail, Tow, Horn, Siren, Aground and Anchor signals.

1. Press and hold the [NAV] key then select “FOG” with the [S]

or [T] key. 2. Press the [CALL(ENT)] key. 3. Select the one of the eight functions described above with

the [S] or [T] key and press the [CALL(ENT)] key. 4. On the “Horn” and “Siren” modes, press the PTT switch to

activate the tone through the HAIL/PA speaker. Press the [S] or [T] keys to adjust the Audio output level. The level can be set from 0 to 30W.

5. To adjust the listen back volume, (while in listenback mode) press the [VOL] Key, then press the [S] or [T] key to the desired listen back volume.

To exit from the FOG HORN mode, press and hold down the [NAV] key again.

GX3000E		Page 73

Image 73

Contents Watt VHF/FM ITU Class D DSC Marine Transceiver Matrix GX3000ETable of Contents Appendix Packing List General InformationOptions Installation Note About VHF Radio Getting StartedSelecting AN Antenna Coaxial Cable Location InstallationMounting the Radio Desktop Mounting Overhead MountingOptional MMB-84 Flush Mount Bracket MMB-84 Flush Mount InstallationReverse polarity connections will damage the radio Electrical ConnectionsWire Color/Description Connection Examples Accessory CableChanging the GPS Time Checking GPS ConnectionsLocal Changing the Time LocationChanging COG to True or Magnetic Receiver Audio Tone Control GX3000E Remote Mic or External Speaker Selection RAM+ mic procedureBasic Operation Power Switch / Volume Control VOL/PWR Controls and IndicatorsPA/FOG Key WX KeyDistress Key Accessory Connection Cable 16/9 Key PTT Push-To-Talk SwitchMemo Basic Operation Transmit Time OUT Timer TOTReception TransmissionSIMPLEX/DUPLEX Channel USE INTERNATIONAL, USA, and Canada ModeNoaa Weather Channels Noaa Weather AlertEmergency Channel 16 USE Noaa Weather Alert TestingMaking Telephone Calls Calling Another Vessel Channel 16 orDual Watch to Priority Channel Operating on Channels 13Selecting the Scan Type ScanningMemory Scanning M-SCAN Priority Scanning P-SCAN Operating the FOG Horn mode Operating the PA Hail mode13 PA/FOG Operation Intercom Operation Navigation IndicationCalling CommunicationVoice Scrambler What is an MMSI? Maritime Mobile Service Identity MmsiDigital Selective Calling GeneralProgramming the Mmsi Transmitting a DSC Distress Alert DSC Distress AlertTransmitting a DSC Distress Alert with Nature of Distress Distress Relay Receiving a DSC Distress AlertTransmitting an All Ships Call ALL Ships CallReceiving an All Ships Call Individual Call Setting up the Individual / Position Call DirectorySetting up Individual Reply Setting up the Individual/Group Call Ringer Pre-Programmable Calling Transmitting an Individual CallManual Calling Receiving an Individual Call Call Waiting DirectoryTo Delete the Received Log from the DSC Log Directory Group Call Setting up a Group CallTransmitting a Group Call Manual Calling Receiving a Group Call Position Request Setting up Position ReplyPre-Programmable Request Transmitting a Position Request to Another VesselManual Request Automatically reply Receiving a Position RequestPosition Send Setting up a Position Send RingerTransmitting a DSC Position Send Call Receiving a DSC Position Send Call DSC Transmission Test Manual Inputting GPS Location LAT/LON Lamp Adjusting Radio SetupLCD Contrast Time Offset True Magnetic Change NAV display Time LocationScan Type Priority Channel SETKEY Beep ON/OFF Scan Resume TimeWX Alert Channel Name Change Flybridge Naming the Radio or Second Station MIC or HandsetFOG Alert Tone Frequency Enhanced RAM+ MIC Operation Squelch Control SQL Activates the squelch adjusting mode11.1 RAM+ MIC Controls PTT Push-To-TalkSWITCH Activates transmission KEY Power Switch PWRDistress KEY Operating the PA / Hailer 11.2 PA/FOG OperationOperating the FOG Horn Press and hold the Dwic key while in Radio mode Manual Inputting of the GPS Location LAT/LON 11.5 DSC/RADIO Setup Mode Changing GPS Information to Vessel Position or COG 12 VH-310 Handset Operation PTT Push-To-Talk Switch Activates transmission12.1 VH-310 Handset Controls PWR keySecondary use Keypad 1DIM key Secondary use 12.2 PA/FOG Operation Intercom Operation Manual Inputting of the GPS Location LAT/LON Radio SETUP-menu DSC SETUP-menu 12.5 DSC/RADIO Setup ModeExternal Speaker AF Selection Type Pattern Usage FOG Horn Timing ChartReplacement Parts MaintenanceFactory Service Symptom Probable Cause Remedy Troubleshooting ChartChannel Assignments VHF Marine Channel Chart Channel USE VHF Marine Channel Chart 157.075 Government Only Environmental protection operations General SpecificationsDeclaration of Conformity Vertex Standard