Standard Horizon Matrix GX3000E owner manual FOG Alert Tone Frequency, Receiver Audio Tone Control

Page 69

10.14 FOG ALERT TONE FREQUENCY

This selection allows you to select the Alert Tone Frequency for the PA/FOG Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps. The default Alert Tone Frequency is 400 Hz.

1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.

2. Press the [ENT] key, then select “FOG Freq.” in the “Radio Setup” menu with the CHANNEL selector knob.

3. Press the [ENT] key.

4. Turn the CHANNEL selector knob to select desired tone frequency.

5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode

press the [16/9] key.

10.15 RECEIVER AUDIO TONE CONTROL

Allows the treble and bass of the speaker audio to be adjusted for best listening in noisy environments. The effect is similar to adjusting the treble and bass controls on a stereo.

1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.

2. Press the [ENT] key, then select “TONE CONT.”

in the “Radio Setup” menu with the CHAN- NEL selector knob.

3. Press the [ENT] key, then select “BASS” with

the CHANNEL selector knob. 4. Turn the CHANNEL selector knob to select de-

sired audio responce in the lower frequency range. Available selections are “–6” through “+6.”

5. Press the [ENT] key to store the selected setting. 6. Select “TREBLE” with the CHANNEL selector

knob. 7. Turn the CHANNEL selector knob to select de-

sired audio responce in the highr frequency range. Available selections are “–6” through “+6.”

8.Press the [ENT] key to store the selected setting.

9.To exit this menu and return to radio operation mode press the [16/9] key.

GX3000E		Page 69

Image 69

Contents Watt VHF/FM ITU Class D DSC Marine Transceiver Matrix GX3000ETable of Contents Appendix General Information Packing ListOptions Installation Note Getting Started About VHF RadioSelecting AN Antenna Coaxial Cable Location InstallationMounting the Radio Desktop Mounting Overhead MountingOptional MMB-84 Flush Mount Bracket MMB-84 Flush Mount InstallationReverse polarity connections will damage the radio Electrical ConnectionsWire Color/Description Connection Examples Accessory CableChanging the GPS Time Checking GPS ConnectionsLocal Changing the Time LocationChanging COG to True or Magnetic Receiver Audio Tone Control GX3000E Remote Mic or External Speaker Selection RAM+ mic procedureBasic Operation Power Switch / Volume Control VOL/PWR Controls and IndicatorsPA/FOG Key WX KeyDistress Key Accessory Connection Cable 16/9 Key PTT Push-To-Talk SwitchMemo Basic Operation Transmit Time OUT Timer TOTReception TransmissionSIMPLEX/DUPLEX Channel USE INTERNATIONAL, USA, and Canada ModeNoaa Weather Channels Noaa Weather AlertEmergency Channel 16 USE Noaa Weather Alert TestingMaking Telephone Calls Calling Another Vessel Channel 16 orDual Watch to Priority Channel Operating on Channels 13Scanning Selecting the Scan TypeMemory Scanning M-SCAN Priority Scanning P-SCAN Operating the PA Hail mode Operating the FOG Horn mode13 PA/FOG Operation Intercom Operation Navigation IndicationCalling CommunicationVoice Scrambler What is an MMSI? Maritime Mobile Service Identity MmsiDigital Selective Calling GeneralProgramming the Mmsi Transmitting a DSC Distress Alert DSC Distress AlertTransmitting a DSC Distress Alert with Nature of Distress Distress Relay Receiving a DSC Distress AlertTransmitting an All Ships Call ALL Ships CallReceiving an All Ships Call Individual Call Setting up the Individual / Position Call DirectorySetting up Individual Reply Setting up the Individual/Group Call Ringer Pre-Programmable Calling Transmitting an Individual CallManual Calling Receiving an Individual Call Call Waiting DirectoryTo Delete the Received Log from the DSC Log Directory Group Call Setting up a Group CallTransmitting a Group Call Manual Calling Receiving a Group Call Position Request Setting up Position ReplyPre-Programmable Request Transmitting a Position Request to Another VesselManual Request Automatically reply Receiving a Position RequestSetting up a Position Send Ringer Position SendTransmitting a DSC Position Send Call Receiving a DSC Position Send Call DSC Transmission Test Manual Inputting GPS Location LAT/LON Radio Setup Lamp AdjustingLCD Contrast Time Offset True Magnetic Change NAV display Time LocationScan Type Priority Channel SETKEY Beep ON/OFF Scan Resume TimeWX Alert Channel Name Change Flybridge Naming the Radio or Second Station MIC or HandsetFOG Alert Tone Frequency Squelch Control SQL Activates the squelch adjusting mode Enhanced RAM+ MIC Operation11.1 RAM+ MIC Controls PTT Push-To-TalkSWITCH Activates transmission KEY Power Switch PWRDistress KEY 11.2 PA/FOG Operation Operating the PA / HailerOperating the FOG Horn Press and hold the Dwic key while in Radio mode Manual Inputting of the GPS Location LAT/LON 11.5 DSC/RADIO Setup Mode Changing GPS Information to Vessel Position or COG 12 VH-310 Handset Operation PTT Push-To-Talk Switch Activates transmission12.1 VH-310 Handset Controls PWR keySecondary use Keypad 1DIM key Secondary use 12.2 PA/FOG Operation Intercom Operation Manual Inputting of the GPS Location LAT/LON Radio SETUP-menu DSC SETUP-menu 12.5 DSC/RADIO Setup ModeExternal Speaker AF Selection Type Pattern Usage FOG Horn Timing ChartMaintenance Replacement PartsFactory Service Symptom Probable Cause Remedy Troubleshooting ChartChannel Assignments VHF Marine Channel Chart Channel USE VHF Marine Channel Chart 157.075 Government Only Environmental protection operations General SpecificationsDeclaration of Conformity Vertex Standard