11.3INTERCOM OPERATION
11.3.1 Communication
1. | Press and hold the [DW(IC)] key while in “RADIO” mode, | |||||
| the mode is changed to “INTERCOM” mode. | |||||
2. | If your GX3000E is equipped with two RAM+ Mic’s (or VH- | |||||
| 310 Handset), select the companion with which you wish to | |||||
| communicate (RADIO, RAM, or ALL) with the [S] or [T] keys, | |||||
| [ | ( |
| )] | key. | |
| then press the CALL | ENT | ||||
3. | When the “INTERCOM” operation is activated, “IC” is dis- | |||||
| played on the RAM+ Mic (and | |||||
| Handset) and “INTERCOM” is dis- | |||||
| played on the GX3000E. |
|
|
| ||
4. | Press the PTT switch, “TALK” is dis- |
| ||||
| ||||||
| ||||||
| played. |
|
|
| (RAM+ Mic’s PTT switch is pressed) |
NOTE: A warning beep is emitted when the RAM+ Mic PTT switch is also be- ing pressed while the transceiver microphone’s PTT switch is pressed.
5.Speak slowly and clearly into the microphone, hold the microphone about 1.5 cm away from your mouth.
6.When finished, release the PTT switch.
7.Press the [DW(IC)] key momentarily, and the mode will revert to “RADIO” mode.
11.3.2 Calling
Hold down the [DW(IC)] key for 1 second or more, when the “INTERCOM” operation is activated. A calling beep is emitted twice from the called unit.
Page 74 |
| GX3000E |
|