Mustang Survival MD3183, MD3184 manual Re-arming Your PFD

Re-arming Your PFD

NOTE: A valid re-arm kit (MA7214) is required for this procedure.

1)Place the Inflatable PFD (Personal Flotation Device) on a smooth, flat surface and wipe off any water. Access the inflator by reaching under the cover and pull it toward you, turning the cell and cover inside-

out to fully expose the inflator for re-arming. Hold the CO2 cylinder through the fabric, using one hand (Fig. 8).

FIGURE 8

2)Insert the metal key between the black locking ring and labeled yellow cap. Turn the key counter-clockwise (Fig. 9).

FIGURE 9
Locking Ring	Key

3)Turn the black locking ring counter-clockwise and lift off the cap (yellow inflator operating head Fig. 10). Dispose of the used cap.

Inflatable PFD Owner’s Manual 9