Mustang Survival MD3184, MD3183 manual Sailing Harness

Page 18

9)Ensure the pull-tab (J) is on the outside of the folded Inflatable PFD. Fig. 30 depicts a correctly folded Inflatable PFD.

FIGURE 31

J

Sailing Harness

CAUTION: Use only as a sailing harness.

Models with a sailing harness (MD3184) are designed to prevent the user from falling overboard when used with a tether with an under-load quick-release hook and have been designed and tested in accordance with Offshore Racing Council (ORC) requirements. Care and attention must be taken to ensure that the harness is used and maintained correctly. The harness is designed to be worn by persons at least 5 feet

5 inches tall (165 cm). The harness should be worn as high on the chest as possible, but in all cases, at least 2 inches (5 cm) above the lowest rib measured from the bottom of the belt and should not be used if it does not fit in this manner. Adjust the harness using the strap adjuster so that the harness is as snug as tolerable.

Failure to adjust the harness properly could result in injury.

When attached to the boat use a tether of less than 6 feet 6 inches (2 m) in length with quick-release under-load hardware (Fig. 31).

Ensure that a tether is secured to both D-rings. When not in use, the D-rings can be pushed under the lapels.

Warning: Use of a sailing harness to prevent falls overboard presents several risks. In case of capsizing or sinking, the boat may take you down. As such, ensure that any tether used has

16

Inflatable PFD Owner’s Manual

Page 17 Page 19
Image 18
Page 17 Page 19
Contents MD3183 Inflatable PFD Contents Approval Conditions and Carriage Requirements What is AN Inflatable PFD? WHY are Pfds Required Safety EQUIPMENT?Instructions for USE MD3183 UnpackedReadiness Checklist Uninspected Commercial Vessel UseComponent Inspection Instructions Donning Instructions Inflating Your Inflatable PFDAbout the readiness of your Inflatable PFD Sizing and Fit Automatic Inflator Automatic Backup InflationManual Inflation InformationDeflating the Inflatable PFD Special Considerations for Inflatable DevicesUsage Below Freezing Important Ensure all air has been removed from the PFDYour device is ready to be repacked see Repacking p Re-arming Your PFD Trash Dispose of the used inflator bodyShaft Black RingRepacking Fold over the top side E and cover F Fasten the Velcro tab H to keep zipper closed Sailing Harness Is Your PFD in Good and Serviceable CONDITION? Check the following at the intervals listed belowIi Ensure the manual pull-tab is accessible Before Each UseEvery Two 2 Months Cleaning and Storing of Your Inflatable PFD HOW and WHY to Test Your PFDVi Ensure the single point status indicator is green Fig HOW do YOU Test Your PFD Using the Automatic INFLATOR? HOW do YOU Test Your PFD Using the Oral INFLATOR? Put on the Inflatable PFDWear Your PFD HypothermiaHow hypothermia affects most adults Page Inflatable PFD Safety Accessories Additional InformationDo not Attach PFD’S to Your Boat WE Save Lives for a Living
Related manuals
Manual 28 pages 5.89 Kb

MD3183, MD3184 specifications

Mustang Survival has long been an industry leader in personal flotation devices and water sports gear, and their MD3184 and MD3183 models epitomize their commitment to innovation and safety. Designed specifically for commercial applications, these life jackets are ideal for marine professionals, rescuers, and avid water sports enthusiasts who require robust performance and reliability.

The Mustang Survival MD3184 and MD3183 are built with advanced materials that prioritize durability and comfort. The outer shell is made from high-quality, abrasion-resistant fabric, ensuring that the jackets can withstand the rigors of marine environments while keeping wearers protected. The interior utilizes a soft, high-visibility foam that offers not only superior buoyancy but also increased comfort for prolonged use.

One of the standout features of the MD3184 and MD3183 is their design focused on mobility. These jackets boast a low-profile design that allows for ease of movement, ensuring that users can perform necessary tasks without restrictions. The strategically placed adjustments and side panels contribute to a snug fit, which is essential when working in dynamic situations on the water.

Safety is paramount in the design of these jackets. They include reflective piping and accents that enhance visibility in low light conditions, making it easier for rescue teams to locate individuals in distress. Additionally, both models are equipped with a built-in whistle and access points for harness attachment, enhancing their functionality in emergency scenarios.

The MD3184 and MD3183 also integrate Mustang Survival's proprietary Flotation Technology, which provides excellent buoyancy when needed most. The jackets are designed to turn unconscious wearers face-up, greatly increasing chances of survival until help arrives. It's this focus on advanced safety features that has made Mustang Survival a trusted name in the industry.

Furthermore, both the MD3184 and MD3183 models are available in various sizes to accommodate a wide range of users, promoting inclusivity in personal flotation devices. They also meet or exceed numerous safety standards, ensuring compliance with regulations and providing peace of mind for users.

In conclusion, the Mustang Survival MD3184 and MD3183 life jackets are excellent choices for anyone in need of reliable and high-performing flotation devices. Combining advanced safety features, comfort, and a focus on mobility, these models are set to deliver exceptional performance in various marine environments. Whether for work or leisure, Mustang Survival reaffirms its dedication to keeping individuals safe on the water.
Top Page Image Contents